Tutorials for installing chinese mainboards?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ducky29
    Badcaps Veteran
    • Dec 2015
    • 370
    • Europe

    #1

    Tutorials for installing chinese mainboards?

    Does anybody have any detailed tutorial on how to install universal chinese mainboards? Thanks
  • jjanssen7
    Badcaps Veteran
    • Nov 2012
    • 252
    • Canada

    #2
    Re: Tutorials for installing chinese mainboards?

    https://www.youtube.com/watch?v=w20hvP_H2Ck

    Interesting. Always wanted to try this but no time to play around with it.

    Comment

    Related Topics

    Collapse

    • valente222
      help SG2701B01-7 panel chinese, would this integrated circuit be equivalent? Chinese IC CS601C regulator.
      by valente222
      Hi, I'm repairing this Chinese SG2701B01-7 panel. There isn't much information about it. The original part for the panel is a CSOT CS601C regulator. I can't find anything commercial on Aliexpress; there's only the CS601 without the final 'C'. They claim it's a variant. But will it be compatible? Well, my diagnosis on this screen is a video problem; the image is practically black, although there is HDMI communication. The LED light is on (backlight), but there is no VGL, no 3.3V, and no VSS. It seems that this IC is the one controlling these voltages. The monitor worked correctly for a moment and...
      05-12-2025, 03:42 PM
    • caspian
      Experiences on New Laptop Mainboards
      by caspian
      Dear Forum Members,

      There are many non-authorized sellers who sell spare mainboards for laptops. The question is how do they provide these mainboards?
      It is possible that some of these mainboards were defective working mainboards that were set to be recycled in the factory, but they were sold as spare mainboards. It is also possible that some of these mainboards were defective working mainboards that were replaced by a new one so that the old one was sold as a spare mainboard.
      Defective working means the mainboard still works but it has some minor problems. In the...
      08-30-2019, 10:36 PM
    • kuraimangetsu
      PRECISION 3510 BSoD when installing windows
      by kuraimangetsu
      Hi.
      I received a dell precision 3510.
      works fine on bios
      but i always get a BSoD when installing windows 7-10-11 64-86 uefi or legacy.

      tried changing RAM and swap slots.
      changed the M.2 to new one too.
      tried like 15 different OS! same thing! still getting BSoD when installing windows.
      tried hirens BOOT, but still getting system crash after two minutes.
      even tried linux still getting crash while installing

      tried updating bios and downgrading it same thing

      is reflashing new bios straight to the IC is...
      01-04-2023, 11:42 AM
    • ktmmotocross
      Lenovos new Ideapad 3 5G ARM Snapgragon. dont see hardware when installing W11
      by ktmmotocross
      I have this Lenovo Ideapad 3 5G ARM Snapgragon 14Q8X05. that dont see hardware when installing W11. it literally says " install driver to see hardware.
      disc turns bad on him so i dont have recovery

      i cannot find anything about this fault. on support of lenovo same nothing. How to deal with this new lenovo crap?
      07-04-2025, 02:55 AM
    • itsthatidiotagain
      CDS‑200B ultrasonic cleaner - (other generic Chinese cleaners are somewhat similar)
      by itsthatidiotagain
      CDS‑200B ultrasonic cleaner - AKA James Ultra 7050 etc.

      There are many versions of cheap Chinese ultrasonic cleaners, and a fair few share this design, with a removable tank with handle. There are also fixed tank versions which look to use the same basic layout and presumably the same PCBs.

      I picked one up "spares or repair" on ebay, and the cleaner was dead, but the fuse wasn't blown.

      A quick diode check revealed D7 was shorted. D7 is a 12V 1/2 Watt Zener. I had one in my stash, so this was about as close to a "five minute repair" as...
      06-23-2025, 03:22 AM
    • Loading...
    • No more items.
    Working...