help SG2701B01-7 panel chinese, would this integrated circuit be equivalent? Chinese IC CS601C regulator.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • valente222
    Senior Member
    • Feb 2021
    • 80
    • PERU
    #1

    help SG2701B01-7 panel chinese, would this integrated circuit be equivalent? Chinese IC CS601C regulator.

    Hi, I'm repairing this Chinese SG2701B01-7 panel. There isn't much information about it. The original part for the panel is a CSOT CS601C regulator. I can't find anything commercial on Aliexpress; there's only the CS601 without the final 'C'. They claim it's a variant. But will it be compatible? Well, my diagnosis on this screen is a video problem; the image is practically black, although there is HDMI communication. The LED light is on (backlight), but there is no VGL, no 3.3V, and no VSS. It seems that this IC is the one controlling these voltages. The monitor worked correctly for a moment and then stopped displaying an image; it seems to be blind.
    Attached Files
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8048
      • Canada
      #2
      Taobao has the CS601C.

        Comment

        • valente222
          Senior Member
          • Feb 2021
          • 80
          • PERU
          #3
          Originally posted by CapLeaker
          Taobao has the CS601C.
          Unfortunately, there is no logistics to try to purchase in my region. I bought its equivalent; when it arrives, I will solder it and try the result.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • bilux
              uP0109: 2A Ultra Low Dropout Linear Regulator equivalent substitute
              by bilux
              Hello everyone,
              I want to find a replacement for uP0109 8pins, and i found this parts:

              uP0109 is "2A Ultra Low Dropout Linear Regulator"
              RT9199 is "Cost-Effective, 2A Peak Sink/Source Bus Termination Regulator"
              FP6137C is "2A BUS TERMINATION REGULATOR"

              can replace uP0109​ by RT9199 or FP6137C ?
              11-01-2024, 12:00 PM
            • howardc64
              LG 49UJ6500 LCD panel lighter band that goes away
              by howardc64
              49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

              Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
              02-19-2023, 12:13 AM
            • Storyteller12
              QN55Q60R Service Menu Panel Help
              by Storyteller12
              I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

              I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

              I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

              the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
              01-13-2024, 01:57 PM
            • AK_777
              Sony KD-65A1 Repair – 4 Red Blinks Error
              by AK_777
              Hi everyone!
              I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

              Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
              02-20-2025, 04:15 PM
            • KYBOSH
              Samsung UN50TU8000 - Dead Panel Forensic Questions
              by KYBOSH
              I came across a 50inch TU8000 that wouldnt start up properly (blinking stand-by light, backlights would cycle on and off).





              When i opened it up and removed the power to the mainboard the backlights powered up and everything looked uniform.
              When reconnected the mainboard but disconnected the flex cable to the panel i heard the TV startup with the intro sound.






              Later I checked for shorts on the panel PCB boards but could not find anything.
              When I took a look with the FLIR i noticed the 2 resistors...
              08-10-2024, 08:39 AM
            • Loading...
            • No more items.
            Working...