UN60J6200AFXZA Backlight issue

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • neilc6
    Badcaps Legend
    • Nov 2015
    • 1550
    • Canada
    #21
    Re: UN60J6200AFXZA Backlight issue

    My replacement board from Buyqual arrived and it's a BN44-00703G from a UN48J series. Board is a little smaller but the chassis has correct mounting holes. Backlight connector is also different but they provided an adapter cable. It is working.

    Did find a few videos from bigdog8882 on youtube. He's found blown surface mount resistors, a bad diode and a bad FET for this power supply. All these components test ok on my board.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • cheebster
        iPad Pro 12.9 5th Gen Backlight Issue
        by cheebster
        Hello, got an iPad Pro A2378 12.9 5th gen with no backlight. Got another test unit without screen, tested the screen, still no backlight with the test unit.
        Figured out the backlight on the screen was bad, ordred a new backlight from mobilesentrix, *carefully replaced it* without damaging the lcd, oh well.
        Final result, issue is still there, the screen has no back lights. So i'm back to square one, with 3 hours less and 100$ out, issue still on the screen.
        The panel is still ok, i can see the apple in the middle of the screen when it kicks in, just no backlight.
        Anyone...
        05-20-2025, 09:17 AM
      • lmcancu
        RCA RLDED 4331B: 43 inch LED TV: Backlight issue
        by lmcancu
        Hi I am having an issue with the LED backlight of this TV. I can see the picture with a flash light, so I determined it was a backlight issue.

        Initially, after opening it I found 2 shorted and 1 open LED on 2 strips (total of 4). I removed the LEDs and shorted the pads together to verify if the backlight would work.

        Testing it, I found the backlight turned on and I measured 54V when TV was in standby (off), and 100v when TV was turned on. The 4 strips each contain 9 LEDs, so 36 in all minus 3.

        Instead of putting it back together I decided to replace...
        04-01-2023, 01:11 PM
      • shellybelly
        Razer Blade 2016 6700k 1060 RZ09-01952 suspected backlight power rail issue.
        by shellybelly
        Back Story
        I just recently purchased a RZ09-01652 Razer Blade 14 Touch v4(2016) as a project. I suspect the original motherboard had overheated and caused board damage to the vrm's for the CPU and GPU as now that motherboard works however will lockup on you often due to hardware clock issues.
        So after some research and looking at options for replacement motherboards I got a replacement RZ09-01952 razer blade 14 motherboard which has the 1060 vs the 970m that was in my original motherboard. I have contacted the seller about the motherboard being bad however I doubt they will be...
        08-27-2023, 10:40 PM
      • Riananyaina
        MacBook A1708 820-00840-A backlight issue
        by Riananyaina
        Hello Everyone ,

        today I'm coming to you regarding my issue which is no Backlight .

        I have image on my screen but no light .

        The macbook was one that I bought few month ago that I used with an external screen . Now I started to do some analysis on the MB which my limited knowledge .
        First thing is that it suffered from liquid damage . The fuse was not ok when I openned it the first time . But I already changed it after testing that there is no short to ground on this line .

        Please find below few informations which can help for the analysis...
        04-24-2023, 05:03 AM
      • Yanleb
        Vizio M70-D3 4K with dark spots backlight issue
        by Yanleb
        I have a Vizio M70-D3 4K with a dark spots backlight issue. It is using the Y8387248A backlight driver board.

        On this model each of the 64 transistor powers 2 LEDs. Using my TKDMR TD3H backlight tester I've determined that the backlight LED strips were the issue, and the backlight driver board was just fine. Some LED pairs required 5.9 volt at 155mA, some required 9.5 volt and some were completely open.

        I've removed the LCD panel and once the LED strips were exposed I've tested them again by connecting my LED tester directly on the test pads. To my surprise all, I've...
        03-22-2022, 01:06 AM
      • Loading...
      • No more items.
      Working...