LG 60LN5400 Internal Metal Stand Plate

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Michale32086
    New Member
    • Nov 2011
    • 1453
    • USA
    #1

    LG 60LN5400 Internal Metal Stand Plate

    Anyone have a picture of this??

    I took apart the recently repaired 60LN5400 and I'll be damned if I can find the internal metal stand back plate that goes with this TV..

    I found the stand.. Can't find the plate to save my life...

    If I can get a picture, I know what to look for..

    Thanx
    Tags: None
    • vinceroger69
      Badcaps Legend
      • Mar 2012
      • 6714
      • uk
      #2
      Re: LG 60LN5400 Internal Metal Stand Plate

      is it shown in this video or is that just the t con cover
      https://www.youtube.com/watch?v=gmH6N-kIdtk

        Comment

        • Michale32086
          New Member
          • Nov 2011
          • 1453
          • USA
          #3
          Re: LG 60LN5400 Internal Metal Stand Plate

          That looks like it!! Thanx

          Now I at least know what I am looking for...

          Anything that sits longer than a week has gremlins that come in at night and throw all the parts around..

          Thanx again...

            Comment

            Previous template Next

            Related Topics

            Collapse
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • DXseekerMO
              Samsung UN65NU6900FXZA Stand-by light on but voltages on PS indicate TV should be on
              by DXseekerMO
              Hello everyone!

              Tonight I picked up a Samsung UN65NU6900FXZA with a curious issue.

              Symptoms:

              1) Plug TV in to AC outlet, stand-by light illuminates briefly and goes out.
              2) TV does not appear to turn on
              3) Backlights do not illuminate, voltages associated with backlights on Power Supply are not present
              4) "Power on" terminal on Power Supply has 3.26v
              5) "A13V" terminals have 12.9v
              6) Stand-by test jumper on Power Supply has 12.9V
              7) Optical audio jack on Main Board illuminates
              8) With stand-by...
              06-09-2021, 12:19 AM
            • silver60618
              How to clean Liquid Metal from under CPU?
              by silver60618
              Hi all, Im working on a board, that my customer brought to another shop, and smeared liquid metal all over the board.
              The laptop powers on, then shuts off. I noticed traces of Liquid Metal near the edge of the CPU, but I fear some maybe underneath.

              Has anyone ever tried Ultrasonic cleaning, or compressed air to remove or agitate the liquid metal?
              07-11-2025, 01:47 PM
            • FriedFred
              Schenker VIA 15 PRO, PF 4NU1F V1.0, P/N: MBPPF4NU18-F310 - 36mA in stand-by
              by FriedFred
              Hello, everyone!
              I have here a Schenker VIA 15 PRO, with this numbers on the board: PF 4NU1F V1.0 and P/N: MBPPF4NU18-F310 .
              I took out the memory and the battery and the SSD.

              So, in stand-by, only the board, takes 36mA. No power-button pressed at all, I can measure 1.8V, 3.3V, 5V. All coils present voltages except the two power rails for the CPU. The CPU is a AMD Ryzen 5 4600H.
              After pressing the power-button, the current raises to 500mA and the two power rails for the CPU show up with 0.8V.
              After several seconds, the fans switch-off and the board keeps powered...
              03-08-2025, 04:45 AM
            • Titus6
              LG OLE65C1 Stand-By issue
              by Titus6
              Hello everyone,

              I bought an OLED65C1 refurbished TV back in 2022 from a shop. The TV is awesome, this is my first OLED and I really love it.

              However I have an issue with the TV since the end of last year. I noticed when my TV is in Stand-By, sometimes the LED goes off then comes back on. When do so it seem periodical. It only goes away for 1-2 seconds, than comes back on. The TV NEVER turnes off, while it's on, so it's not overheating issue or electrical power issue.

              I bought a service remote (MKJ39170828) and checked the menu 3. Power On/Off Status. I took...
              Power On_Off Status
              1 Photo
              01-31-2025, 04:01 PM
            • Loading...
            • No more items.
            Working...