hi guys can someone share with me a dump for this board TP.SIS231.PT82 panel lsc460hj04, i try to find it but i cant find nothing, i attached mine if someone can fix it, it restart all time
thanks!!
thanks!!
-
This laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once... -
Asus X512FF (X512FLC) REV 3.1
Help to find the KBC dump for this model.
The laptop works. but there is a problem, after power off it no longer responds to the power button, that is, you have to reset the battery and it turns on again (autostart).
There is also no keyboard backlight and the touchpad does not work.
The multicontroller is responsible for controlling these functions. Before I replace it, I would like to flash it first. thank you
Attached is a picture of the sticker and the native dump.... -
Peace be upon you.
Brothers, I need a dump for a Sony LCD smart TV.
Screen type and model: SONY KDL-55W805B.
Please provide a dump for the device.
The device boots up but the SONY logo doesn't appear at first and remains in this state.
β -
Hello everyone, can anyone tell me how to find the "build id" through the HEX editor?
I unpacked the .exe bios from the official Dell support site (using Dell Extract) and have two updates: Model=07A1 and 07CC. How can I find "07A1" or "07CC" in the bios dump using a HEX editor?
Unfortunately, I can't find it. There are no such inscriptions on the motherboard either.... -
Hi all!
long shot but lets see
POS device, with a what I suspect a corrupted bios.
All power rails are up and running, but not POST.
On Sango site cant find any bios file.
Contacted them by mail and asked for it, but not sure they will even reply
Model: Sango J1900
Board: SANGO-MB-J1900
SN:RC18110135
Would someone be able to take a look at this backup dump and check if something can be done ?
Thanks for any help
Apreciate it
Cheers...
Comment