I've got a Sanyo FW65D25T and need some help fixing it.
I plug the TV in and the red standby light comes on. I then press the power button on the remote and the standby light blinks red 8 times. On the 5th blink, the backlights come on but I don't see any picture or menu on the screen.
I thought the power supply might have been bad so I replaced it and it didn't make a difference. Can anyone please guide me on what to check/test/replace next? Thinking it is either the tcon board or the main board. Tcon boards are cheap ($27), main boards are not ($295). Would replacing the EEPROM ($15) on the main board possibly help this issue?
I plug the TV in and the red standby light comes on. I then press the power button on the remote and the standby light blinks red 8 times. On the 5th blink, the backlights come on but I don't see any picture or menu on the screen.
I thought the power supply might have been bad so I replaced it and it didn't make a difference. Can anyone please guide me on what to check/test/replace next? Thinking it is either the tcon board or the main board. Tcon boards are cheap ($27), main boards are not ($295). Would replacing the EEPROM ($15) on the main board possibly help this issue?
Comment