Toshiba 48L1435 Firmware Needed

[zomi]

Toshiba 48L1435 Firmware Needed

its flashing red/ green
Looks like the firmware has corrupted
Anyone have the flash file for this tv

thanks

[nomoresonys]

Re: Toshiba 48L1435 Firmware Needed

http://www.dl.toshiba.com/DLY/index....ion=GB&lang=EN

[zomi]

Re: Toshiba 48L1435 Firmware Needed

That only works if the tv boots, no ?

[nomoresonys]

Re: Toshiba 48L1435 Firmware Needed

Can't recall but theres a procedure there in the directions.

[nomoresonys]

Re: Toshiba 48L1435 Firmware Needed

Hmm, says use remote, I'm not sure, heres the directions tho.

[vinceroger69]

Re: Toshiba 48L1435 Firmware Needed

mainboard 17MB95? what lcd panel is used?

[zomi]

Re: Toshiba 48L1435 Firmware Needed

Yes mb95

screen ves480unvs- m01

have attached pics too

[vinceroger69]

Re: Toshiba 48L1435 Firmware Needed

maybe pm ducky29 he maybe able too help with the firmware hes helped a few members out with vestel firmware i will keep looking on the sites im registered on too see if i can find any firmware now i have the panel id

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

Please I have a vestel 17mb95 r3 for 42led400s and the picture showing was flip upside down please help me out how can this be corrected.

[nomoresonys]

Re: Toshiba 48L1435 Firmware Needed

Do you know the history of the tv, the last vestel with a flipped screen we saw not long ago, the problem was a mismatched replacement mainboard, doesn't have to be your problem, just one possibility.

[yokoono]

Re: Toshiba 48L1435 Firmware Needed

Please I have a vestel 17mb95 r3 for 42led400s and the picture showing was flip upside down please help me out how can this be corrected.

Cod panel (VES420xxxxxxxx) ??.

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

Actually I just bought the board but the panel code is ves400unes-05-b

[yokoono]

Re: Toshiba 48L1435 Firmware Needed

You have the panel profile below. With him you make the right image. I hope you know the installation procedure. It lasts 1 minute.

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

No Please can you guide me on how to install that

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

You have the panel profile below. With him you make the right image. I hope you know the installation procedure. It lasts 1 minute.

No Please can you guide me on how to install that

[yokoono]

Re: Toshiba 48L1435 Firmware Needed

1. Format a stick with FT32
2. Create a folder on the stick called pq
3. Unzip the profile and put the resulting file in the folder
4. Turn on the TV and insert the USB stick
5. Type MENU and then 4725
6. Go down to USB Operations and type OK. Wait 5-10 seconds
7. Exit the menu and turn off the TV. Wait until the stby LED on the TV stops flashing
8. Unplug the TV and wait until the stby LED goes out.
9. You turn on the TV and everything should be ok.

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

1. Format a stick with FT32
2. Create a folder on the stick called pq
3. Unzip the profile and put the resulting file in the folder
4. Turn on the TV and insert the USB stick
5. Type MENU and then 4725
6. Go down to USB Operations and type OK. Wait 5-10 seconds
7. Exit the menu and turn off the TV. Wait until the stby LED on the TV stops flashing
8. Unplug the TV and wait until the stby LED goes out.
9. You turn on the TV and everything should be ok.

Ok Thanks, I have done that so let me turn the TV on back

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

Ok Thanks, I have done that so let me turn the TV on back

Still the same the image is still flipped upside down

[yokoono]

Re: Toshiba 48L1435 Firmware Needed

1. Use a stick with the smallest capacity (max. 16Gb)
2. You use another stick
3. Type MENU 4725 and see if the panel has changed to VES400UNES-05-B
4. If something hasn't changed, you're not doing it right.

[Skyeface]

Re: Toshiba 48L1435 Firmware Needed

1. Use a stick with the smallest capacity (max. 16Gb)
2. You use another stick
3. Type MENU 4725 and see if the panel has changed to VES400UNES-05-B
4. If something hasn't changed, you're not doing it right.

But I used 32gb flash