Re: Westinghouse WD40FW2490 not powering up
.8 drain to source is is not good but it may not be the component that is shorted. Yes, center pin is connected to tab. Have you checked the large diode to the right of Q2054, also check the resistance across that large cap next to the diode. You could lift the source pin of that Q2054 but sometimes you can damage the transistor. so check the other parts first
.8 drain to source is is not good but it may not be the component that is shorted. Yes, center pin is connected to tab. Have you checked the large diode to the right of Q2054, also check the resistance across that large cap next to the diode. You could lift the source pin of that Q2054 but sometimes you can damage the transistor. so check the other parts first
Comment