about samsung color issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hispeck
    Badcaps Veteran
    • Aug 2015
    • 258
    • nigeria

    #1

    about samsung color issue

    Hello Mate

    I am working on this samsung panel, when i power it on it will work fine picture ok, but after a while the picture will shake then color will change to what you are seeing on this pictures, please i need help
    Hispeck
    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: about samsung color issue

    https://www.badcaps.net/forum/attach...7&d=1521487478
    It looks like some of the traces go damaged, you can see the white silkscreens are scarped off.
    BTW, is this board on the bottom edge of the LCD panel?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • hispeck
      Badcaps Veteran
      • Aug 2015
      • 258
      • nigeria

      #3
      Re: about samsung color issue

      yes , i forgot to explain it, i did it when i thought cutting can make a change the tracks you see that was cut was done by me, but is not from there
      thanks

      Comment

      • hispeck
        Badcaps Veteran
        • Aug 2015
        • 258
        • nigeria

        #4
        Re: about samsung color issue

        should i return the set back to the customer?

        Comment

        • Davi.p
          Hobbist Tech
          • Sep 2009
          • 4287
          • Italy - Milan

          #5
          Re: about samsung color issue

          I dont see which defect has from my tablet, can't you explain it in words?

          Comment

          • hispeck
            Badcaps Veteran
            • Aug 2015
            • 258
            • nigeria

            #6
            Re: about samsung color issue

            what i mean is that this tv will work fine in the first 20 mins after the color will change to what you see on my post, when i put it off and power again the same thing
            hispeck

            Comment

            • Andrew F. Ali
              Badcaps Legend
              • Jan 2014
              • 2450
              • Trinidad & Tobago

              #7
              Re: about samsung color issue

              Check voltages: 1. Von = 20V to 35V, 2. Vdd = 3.3V, 3. Vda = 13V to 25V,
              4. Voff = -5V to -8V and 5. Vcom = 7V on the T-CON Bd. These should be present and if varying too far of from these then your problem could be off the Level Shifter IC. You could try cutting off CKV1 and CKVB1 as a pair, strapping and connecting to STVP or GND the. CKV2 and CKVB2 as a pair. For me those points are very fine and I attempt to do that kind of panel repair very rarely. Good Luck, though.

              Comment

              • Davi.p
                Hobbist Tech
                • Sep 2009
                • 4287
                • Italy - Milan

                #8
                Re: about samsung color issue

                I repeat the pitcures of screen image are not so esplicative, is seems only an old movie with poor quality film..

                Comment

                • hispeck
                  Badcaps Veteran
                  • Aug 2015
                  • 258
                  • nigeria

                  #9
                  Re: about samsung color issue

                  Thanks friends,
                  you have done well by replying me, i tried to cut ckv1 and ckvb1, but the picture after a while will have white horizontal bar once the menu appears or any wright up shows on screen, i read about strapping the cut pair to voff or gnd, please i need help on how to strap this very panel after cut.
                  sometime when i cut double image on same panel the screen will have some tin lines, because i dont know how to do the strapping thing, i end up not fixing this panel. please i will be grateful if i can get assistance with picture if possible.
                  thanks
                  hispeck

                  Comment

                  • hispeck
                    Badcaps Veteran
                    • Aug 2015
                    • 258
                    • nigeria

                    #10
                    Re: about samsung color issue

                    on how to strap and where to strap after cut

                    Comment

                    • hispeck
                      Badcaps Veteran
                      • Aug 2015
                      • 258
                      • nigeria

                      #11
                      Re: about samsung color issue

                      Andrew,
                      you said i should connect the cut pair to stvp or gnd, some people say connect to voff and gnd, please which one is right to do?

                      Comment

                      • Davi.p
                        Hobbist Tech
                        • Sep 2009
                        • 4287
                        • Italy - Milan

                        #12
                        Re: about samsung color issue

                        I don't undersand theese procedures. CKV1/2, CKVB1/2 are clock signals for the gate drivers, if one cut them or put them to GND i guess is like shutting off all gate drivers so you will end with no image... STVP is approx. the starting signal for the gate driver 1, which is the meaning of joining it with the clock signals?

                        Comment

                        • hispeck
                          Badcaps Veteran
                          • Aug 2015
                          • 258
                          • nigeria

                          #13
                          Re: about samsung color issue

                          So what do you advice Davi.p concerning the problem am talking about? like i said after cutting ckv1 and ckvb1 i get tin lines on screen, some say strap the cut line going to the panel to voff or gnd, please give me your own opinion what you think is best for me to do and achieve result

                          Comment

                          • Davi.p
                            Hobbist Tech
                            • Sep 2009
                            • 4287
                            • Italy - Milan

                            #14
                            Re: about samsung color issue

                            As already said, i'm unable to recognize this fault from your simple pictures, more screen pictures needed, also magnified ones..
                            Also never forget to mention THE TV MODEL.. Also a text explanation of the problem would help, i can point to a defect of missing horiz. lines but photos are so poor...
                            Last edited by Davi.p; 04-12-2018, 11:11 AM.

                            Comment

                            • Andrew F. Ali
                              Badcaps Legend
                              • Jan 2014
                              • 2450
                              • Trinidad & Tobago

                              #15
                              Re: about samsung color issue

                              CKV1,2,3 and CKVB1,2,3 are cut in pairs. That is CKV1 and CKVB1 is a pair as is CKV1 and CKVB2. So for example the cut is done on CKV1 and CKVB1 first. The cu tis made to separate the signals output from the Level Shifter IC to the input at the Panel. Strapping takes place on the Panel side and connected to Voff and if that does not work try GND. If that did not work reconnect the cut connections and repeat procedure with CKV2 and CKVB2

                              Comment

                              • Davi.p
                                Hobbist Tech
                                • Sep 2009
                                • 4287
                                • Italy - Milan

                                #16
                                Re: about samsung color issue

                                I don't understand the theory of that explanation, so cutting first CKV1+CKVB1 (gate drivers clock signals) and join them to Voff or gnd, which sense has this?
                                Last edited by Davi.p; 04-13-2018, 08:43 AM.

                                Comment

                                • hispeck
                                  Badcaps Veteran
                                  • Aug 2015
                                  • 258
                                  • nigeria

                                  #17
                                  Re: about samsung color issue

                                  Thanks all for your support, i feel loved with your corporation
                                  Hispeck

                                  Comment

                                  • Davi.p
                                    Hobbist Tech
                                    • Sep 2009
                                    • 4287
                                    • Italy - Milan

                                    #18
                                    Re: about samsung color issue

                                    hispeck i don't understand you...... why not to add some pics?

                                    Comment

                                    Related Topics

                                    Collapse

                                    • Document Archive
                                      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                                      by Document Archive
                                      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                                      09-07-2024, 05:50 AM
                                    • vincentedel
                                      Samsung SyncMaster 740n Phase Control Issue
                                      by vincentedel
                                      Hello,
                                      I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some timeβ€”like after playing a gameβ€”the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.

                                      I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
                                      04-22-2025, 12:33 AM
                                    • Manucsl
                                      QE65Q800TATXXC Samsung TV Issue
                                      by Manucsl
                                      Hello.

                                      My TV is a QE65Q800TATXXC Samsung TV.

                                      Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
                                      Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
                                      Any ideas to check would be very appreciated 😊

                                      After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump...
                                      02-19-2025, 07:47 AM
                                    • FourRunner
                                      Display issue Samsung TV UA65JS9000W
                                      by FourRunner
                                      I purchased a used Samsung TV model UA65JS9000W recently knowing it had an issue with the screen. When switched on the picture was bright both sides of the screen but a little darker in the middle of the screen. Thinking this was the back lights (side mounted LCD strips) I replaced these, however the issue is still there. I am now thinking it may be a TCOM issue, but am not sure, any advice on this would be appreciated. Also whilst changing out the back lights I noticed the the thick clear plastic sheet (maybe 1.5 to 2mm thick) below the diffusers there is cracking (up to 75mm) on the sides and...
                                      10-03-2024, 07:05 PM
                                    • ScHAmPi
                                      Samsung UE48JU7000 screen issue after backlight replacement
                                      by ScHAmPi
                                      Hi all,

                                      Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:


                                      I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...
                                      07-15-2024, 05:41 AM
                                    • Loading...
                                    • No more items.
                                    Working...