HiSense Remote

[Amraks]

Looking at this remote that isn't working and I find a capacitor missing c29
it appears it needs a 10nF cap in place of the missing capacitor
this cap leads back to pin 8 on this MPU-6050 chip which Pin 8 Is CS in example schematic its a VLOGIC Bypass Capacitor which should connect to ground to pull the chip low for this chip to function.

Would this cause the remote to not work?

[Andrew F. Ali]

Re: HiSense Remote

Yes, the Remote will not function without it. Can you get a replacement? 10nF=0.01uF. You can use an e-cap in place, too.

[Amraks]

Re: HiSense Remote

I reckon I can find one off some junk I have under my desk.

[Amraks]

Re: HiSense Remote

No go on that one I reckon that cap shorted out and burnt off so I would say the chip was fried and a few suspect diodes coming off that Vlogic line
I suggested to the customer to get a universal remote as these remotes HiSense remotes typically fail as I have from other people who own these tv's

[diif]

Re: HiSense Remote

No go on that one I reckon that cap shorted out and burnt off so I would say the chip was fried and a few suspect diodes coming off that Vlogic line
I suggested to the customer to get a universal remote as these remotes HiSense remotes typically fail as I have from other people who own these tv's

Doubtful it burnt with 3v. More likely knocked off the PCB due to impact.