Need resistor help

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • boomtheroom
    Member
    • Apr 2018
    • 28
    • new zealand

    #41
    Re: Need resistor help

    nah purchased separately..

    Comment

    • WildPuppy
      Senior Member
      • Mar 2018
      • 61
      • Romania

      #42
      Re: Need resistor help

      Originally posted by boomtheroom
      could i use a 1ohm 1/2 watt resistor in its place?
      Yes you could, but I strongly suggest you check the board for more damage as I suspect there are more shorted parts than the "usual" 6 FETs in your case.
      I may be wrong but extensive checking cannot hurt, whilst not enough will surely hurt your board or maybe even other boards.

      Originally posted by boomtheroom
      nah purchased separately..
      In the pictures that you provided I see that you used RJP's, If you got them from EBay or AliExpress they have a strong chance of them being fakes.
      Last edited by WildPuppy; 04-24-2018, 03:59 AM.

      Comment

      • WildPuppy
        Senior Member
        • Mar 2018
        • 61
        • Romania

        #43
        Re: Need resistor help

        Since this is a Resistor Help thread, I encourage you to read other TNPA5330 or TNPA5335 threads on this forum for more info or start a new thread if your problems do not appear to fit the other scenarios, to further investigate/solve your problem.

        Comment

        Related Topics

        Collapse

        • TinkerTron
          Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
          by TinkerTron
          Hey everyone,

          I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

          Instead, here's what's been bugging me so far:
          The schematic...
          03-06-2025, 02:03 PM
        • artvandalai
          What resistor ohm will work better to repair this waterpik?
          by artvandalai
          The resistor on this waterpik blew. I changed it with the a similar spec 47ohm 2 watt yageo resistor but it still keeps blowing the resistor. Checking with the multimeter the motor, capacitor, diodes, and thermal fuse all checked normal. Will a higher ohm resistor work better? What ohm resistor will work better to repair this waterpik? This video is showing the repair with a 56 ohm resistor https://www.youtube.com/watch?v=_J7_rV7ui1Y
          01-05-2025, 04:10 PM
        • chth96
          Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
          by chth96
          I have purchased an 100-240v AC/5v 2a DC adaptor from aliexpress,and a month ago It smelled burning when I plugin it powerstrip.
          Since then, This AC/DC adaptor have been out of order.
          But A few days ago,I replace 0.5 watt resistor with 1 watt resistor(1ohm) in this adapter.
          After replacing resistor,It succeed to recharge all of android phone.And When I measure voltage on the two pins of USB port,It shows 5.5v
          Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
          And Is there any possibility that it will suddenly explode as well as to be out...
          12-03-2023, 04:40 AM
        • flat-earther
          Hoover FM216LI cordless vacuum refuses to charge
          by flat-earther
          I have a Hoover FM216LI cordless vacuum which isn't charging its internal battery.

          I opened up the unit, and it has 6x Samsung ICR18650-22P cells connected in series.
          5 cells were at about 3.3-3.1V. one was at 2.4V, so I assumed this cell was bad that's why the vacuum wasn't charging so I replaced it with another 18650, but after that the problem still persists, the vacuum turns on a bit and then cuts out since the batteries are empty.

          So I think the over discharged battery wasn't the culprit, it was a symptom of the unit not being able to charge its batteries....
          06-06-2025, 03:14 AM
        • badcap111
          Xiaomi mi 9T missing resistor
          by badcap111
          Hi, while trying to replace a broken screen connector on the motherboard, I knocked off a resistor next to the connector, and the resistor vanished. I have tried to find out the value of the resistor by looking at the schematics, but I cannot find the value. The ID of the resistor, or what you should call it, is R6400.

          I don't know if the resistor is necessary for the phone to function, and the connector is still not soldered on to motherboard. I have contacted Xiaomi and asked them if they know the value, but they want a proof of purchase, which I don't have.

          Is...
          08-07-2023, 10:42 AM
        • Loading...
        • No more items.
        Working...