Sharp LC-C3242U Repair Thread

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PotShotScott
    Member
    • Feb 2007
    • 40
    #1

    Sharp LC-C3242U Repair Thread

    So I picked up a Sharp LC-C3242U that is DOA. Pulled the cover off. Found a Delta DPS-178AP A power board running the show. No standby voltages on the DC side of the board. TV does not power on.

    Did some searching here on the forums to find that D7907 is the diode that typically fails. Sure enough - pulled my D7907 out and it flows both ways. Will likely find the diode here at my local electronic supplier on Monday. Posting PSU pic of location and diode information for further reference.\

    Bad diode - https://www.mouser.com/Search/Refine...Keyword=1N5383
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Last edited by PotShotScott; 12-16-2017, 03:58 PM. Reason: Added diode reference
    Tags: None
    • PotShotScott
      Member
      • Feb 2007
      • 40
      #2
      Re: Sharp LC-C3242U Repair Thread

      Project update. D7907 was indeed bad. Got my new diodes today. Got the TV back up and running to discover that I had purchased a TV with a cracked LCD panel. At least I only paid $10.00 for this one. PSU and Inverter board going up on eBay to see if I can make a little of my money back.

        Comment

        • dskall
          Badcaps Legend
          • Oct 2016
          • 2905
          • usa
          #3
          Re: Sharp LC-C3242U Repair Thread

          Well good repair experience. I post free pick up of tv on craigslist and don't pay for them.
          I assume no responsibility for any stupid suggestions I might post.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • MalodicOne
              macbook pro 820-02100 5v 0 amp
              by MalodicOne
              Unit came to me and customer said they spilled liquid on it. Opened unit and inspected board and saw no signs on liquid reaching the board. Plugged in amp meter and it pulled 20v and booted normally, i connected to internet and ran update on the OS. Came in the next day to test again to make sure unit was functional, now its stuck at 5v and 0 amps no power, no shorts found on so far.

              Tested all CD3217 and RAA489900:
              UF400
              PP3v3_UPC0_LDO- 3.48v, .473 Diode
              PP1v5_UPC0_LDO_CORE- 1.59v, .504 Diode
              USBC0_CC1- 0v, .455 Diode
              USBC0_CC2- 1.66v, .454 Diode...
              07-25-2025, 10:49 AM
            • asr
              Finding replacement diode iPad Pro 3rd gen A1701
              by asr
              Hello, I am looking for help to replace a damaged diode. The tristar was replaced and a diode was damaged in the process. I have a picture of the diode but dont have an exact donor. I mostly have macbooks for donors and only a few ipad and iphone boards. Diode part number: DSF01S30SCAP
              Im not sure where to find the ipad board number. Anybody have an idea where else this diode is used on other boards? Thanks....
              07-09-2024, 06:24 PM
            • unimatrix93
              TV backlight zener diode
              by unimatrix93
              Hello everyone, I'm repairing an LG TV backlight and I noticed some strange behavior when I touching the backlight strip with a missing Zener diode.

              So I replaced the leds on the strips and they seemingly working fine, but soon as I touch the strip which has a missing Zener diode the whole backlight turns off for a few seconds and then turns back on.

              Is this caused by the missing diode? If so what kind of zener diode should I use to replace it?.
              ​​​​
              The led strips has 9 6V leds.


              ​​​
              1 Photo
              02-10-2025, 12:13 PM
            • Baste
              MBR3045CT and SR3045LCT Schottky diode testing help.
              by Baste
              Hello experts,
              Can anyone educate me on how to test MBR3045CT and SR3045LCT Schottky diodes? I'm totally a newbie in electronics, so forgive me if I have cheap tools. In my effort to repair a Gigabyte PSU, I stumbled upon the two diodes, which I suspect are leaky. I tested this with my two cheap multimeters and the newly bought LCR-T4 MC328, and I got confusing results. Below are my test results.

              Aneng ST182 Meter.

              Diode mode.
              MBR3045CT:
              Diode mode
              Pin 2-1 - 0.150v
              Pin 2-3 - 0.150v ...
              4 Photos
              10-21-2025, 06:14 AM
            • NicRac
              monowheel repair,Is the diode the problem?
              by NicRac
              Hello everybody☺️ I am glad to be here and looking forward to a good discussion.

              First of all, I am new here. Therefore I will shortly introduce myself.
              I am Nico and currently I study Physics.
              In my freetime I like to build and repair stuff. Especially big battery's.

              A few years ago I got myself an electric unicycle, monowheel or however you call that.
              The battery bms was broken so I replaced and resolder that. Nothing big.
              I used this thing for some years and had a lot of fun. Unfortunately I used it last time in heavy rain. Usually everything...
              5 Photos
              07-26-2024, 06:13 AM
            • Loading...
            • No more items.
            Working...