Vizio E65X-C2 No picture after few seconds

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hawkinsdj
    New Member
    • Oct 2017
    • 6
    • United States
    #1

    Vizio E65X-C2 No picture after few seconds

    First time posting. Looking for any advice that anybody can offer. Our Vizio has recently stopped working. When we turn it on the Vizio logo shows up and can see a picture for a few seconds before the screen goes black. Back lights are still on. Can't turn tv off with remote or power button on the tv. Only way to get it to turn off is to unplug it. Don't know much about TVs but any advise or suggestions would be greatly appreciated. Thanks.
    Attached Files
    Tags: None
    • hawkinsdj
      New Member
      • Oct 2017
      • 6
      • United States
      #2
      Re: Vizio E65X-C2 No picture after few seconds

      Just talked to my sister who had the same TV. She said theirs did the same thing last year but they never looked into fixing it. Any suggestions of where to start testing to see if I can fix it or do you think it is shot and better off just buying a new one? Thanks

        Comment

        Previous template Next

        Related Topics

        Collapse
        • JJAAMM
          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
          by JJAAMM
          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

          Problem
          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
          07-06-2023, 06:01 AM
        • gavric
          Vizio M70-C3 Half picture is bad, main board on its last leg?
          by gavric
          Hello, i am working on Vizio M70-C3. It can hardly power on, it takes 15 power button presses or remote. Seems like eeprom problem that I seen before but all reading online says that this tv has power board or main board problem.

          When tv powers on vizio V logo shows nice on whole screen. picture 1
          When it goes into tv mode it only shows good picture on left side of screen, right is all scrabbled up. pic 2
          When i start youtube picture shows on left side fine, right is all scrambled. pic 2
          When i click video to start playing picture goes black(like when you change...
          09-02-2021, 08:55 PM
        • mrtek
          Vizio M65-C1
          by mrtek
          Hi.

          picked up another TV. This time is a Vizio M65-C1. TV does not turn on. I had repaired another 60 inch vizio , Bad main board.
          When power button is pressed, the Power led indicator on the bottom right, turns for a few seconds and then it fades away. No backlight or Vizio logo on screen. Removed back cover and repeated test.
          This is the TV This TV is a little different from the Samsung I have worked on. Power supply is on the Left side, Main Bd is on the right side, T-CON , not in the picture is on the bottom. I am assuming that the boards in the middle are the LED...
          07-14-2025, 07:28 PM
        • ggil44
          Vizio M65-E0 No Picture, No Sound
          by ggil44
          Hi I inherited a Vizio M65-E0 that isn't working. It must have been dropped on the corner because I found that the infrared circuit had a capacitor with one end broken off of the board and some green corrosion around the plug to the main board. I re-soldered the capacitor and cleaned the corrosion well and tried turning the M65-E0 on and I was successful. My problem is that while the back lights come on and appear to perform local dimming there is no picture or sound. It kind of looks like you are looking at the TV through a very dense fog, where changing the input on the remote will change bright...
          09-03-2024, 08:30 PM
        • maricm
          Vizio m65-c1 picture flashing on and off on the screen
          by maricm
          HI all,
          hope someone point to the possible issue before I start buying replacement parts.
          Tv starts normal and responds to remote fine, PSU voltages mesured fine 19v was 18.9V under load and 19V with main board disconnected.
          Backlight stays on all the time,
          Sound works fine.
          screen keeps changing form black to full picture in about 1sec intervals.
          Picture looks fine with no visible artifacts.
          I have disconnected backlights and flashlight test confirmed that picture is still doing the same.


          Disconnecting left and right ribbons on...
          11-25-2023, 06:32 PM
        • Loading...
        • No more items.
        Working...