hitachi 48hbt62u Fimrware help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zomi
    Badcaps Veteran
    • Nov 2011
    • 505

    #1

    hitachi 48hbt62u Fimrware help

    Got a hitachi 48hbt62u


    Turns on stuck on the splash screen
    then turns of led keeps flashing
    then bakc to splash screen

    Before I buy a replacement main board

    Any one have a link to the firmware file.
    its a 17MB95M board
  • zomi
    Badcaps Veteran
    • Nov 2011
    • 505

    #2
    Re: hitachi 48hbt62u Fimrware help

    Sorry its A 17MB97 BOARD

    Comment

    • arizanotlari
      Senior Member
      • Nov 2014
      • 158
      • Turkiye

      #3
      Re: hitachi 48hbt62u Fimrware help

      Hello.

      17mb97 firmware : https://goo.gl/pXAGc8
      https://www.badcaps.net

      Comment

      • lesnajair
        Senior Member
        • May 2015
        • 57
        • United Kingdom

        #4
        Re: hitachi 48hbt62u Fimrware help

        Hi
        Did you have any luck with this firmware Zomi?

        Les

        Comment

        Related Topics

        Collapse

        • Edgas10
          Hitachi 48hbt62u update firmware
          by Edgas10
          Hi does someone knows how can i upgrade my firmware on this tv.
          I lost the ability to use netflix and youtube,it
          Needs to be updated but it says there are no updates...
          Thanks edgar
          05-10-2023, 02:21 PM
        • Phil289
          Hitachi 48HBT62U K -Backlight problem
          by Phil289
          Hi
          Would be greatful for some help regarding this problem.

          Tv turns on , Hitachi logo appears with no problems , then depending on how lucky i am i either get a fully working tv for around 5/10 seconds and then the left side of the screen dims down (not dark just dimmer than the right) or sometimes it will just go past the boot logo and go straight to the dimmed left hand side straight away.
          Sometimes turning the tv off and then on again will make it fully bright again but it will then dim on the left shortly after.
          It is a vestel setup with a 17ips71 (190814R4)...
          03-31-2022, 12:34 PM
        • cheeky2
          Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
          by cheeky2
          I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
          Obviously the same LVDS connector for the screen connection...
          05-25-2024, 03:27 AM
        • massimomax
          Firmware TV Hitachi 32HE4500 scheda madre Vestel 17MB211S matrice: VES315UNVL-2D-N11
          by massimomax
          Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
          spero che qualcuno può averlo per riprogrammare eprom. grazie

          Post in English !!!

          I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you


          02-28-2025, 07:27 AM
        • Scruit
          Does the Oak OTI067 have a splash screen / initialization message at bootup?
          by Scruit
          tl;dr ... Question: Does the Oak OTI067 have a splash screen / initialization message at bootup?

          More detail:

          Working on "Uncle Sherman", my Mitsubishi MP-3200 386 from 1988. Before I start up old computers I have a process where I disassemble, test for shorts, visually inspect, capture EPROM images etc.

          My T866II+ give me a "pins not detected" error on the EPROM from the Oak-based (OTI067 GPU but apparently a no-name card??) I assumed the EPROM was bad, ordered a replacement and figured I'd program a downloaded ROM image to it....
          04-17-2022, 06:03 AM
        • Loading...
        • No more items.
        Working...