Philips 47pfl6877h/12

[rickou]

Re: Philips 47pfl6877h/12

So for what I can see you are having problem there are two problems:

Error 15:Indicates that the main
processor was not able to read his bootscript. This error will
point to a hardware problem around the Fusion (supplies
not OK, Fusion device completely dead, link between Mips
and Stand-by Processor broken, etc...)
Other root causes for this error can be due to hardware
problems regarding the DDR’s and the bootscript reading
from the Fusion device.

Error 53:This error will indicate that the Fusion device has
read his bootscript (when this would have failed, error 15
would blink) but initialization was never completed because
of hardware problems (NAND flash, DDR...) or software
initialization problems. Possible cause could be that there
is no valid software loaded (try to upgrade to the latest main
software version). Note that it can take a few minutes
before the TV starts blinking LAYER 1 error = 2 or in SDM
(maintain grounding continuously), LAYER 2 error = 53.

[rickou]

Re: Philips 47pfl6877h/12

Have you try firmware update?

[rickou]

Re: Philips 47pfl6877h/12

can someone help me with installing the other mainboard in service menu i know you have to enter 062596i if i have picture and if i don't 062598i for the panelcode.

062598 MENU and then 426. Normally this number can also e find in the back side of the mainbord

[rickou]

Re: Philips 47pfl6877h/12

I want to post the service manual but is to big how it works with the URL? the manual have everything that you need for the main board repair.

[dskall]

Re: Philips 47pfl6877h/12

Copy url and past into text

[Jimmy1979]

Re: Philips 47pfl6877h/12

Have you try firmware update?

How do i do firmware update?
Tv is dead only standby light for half second and goes out not blinking.

[Jimmy1979]

Re: Philips 47pfl6877h/12

I want to post the service manual but is to big how it works with the URL? the manual have everything that you need for the main board repair.

Can you try post it?
Thanx

[Jimmy1979]

Re: Philips 47pfl6877h/12

062598 MENU and then 426. Normally this number can also e find in the back side of the mainbord

I think this tv had a panel swap
Before because i see an onther number on the panel.
I will post a picture.
Does someone know's if it is the same panel code 426
This panel has a sticker with type 47pfl6097k/12

[vinceroger69]

Re: Philips 47pfl6877h/12

I want to post the service manual but is to big how it works with the URL? the manual have everything that you need for the main board repair.

can you put the manual in a zip file and upload it?

[rickou]

Re: Philips 47pfl6877h/12

My problem was too big the PDF I have split in two

[Jimmy1979]

Re: Philips 47pfl6877h/12

my problem was too big the pdf i have split in two

👍🏻

[rickou]

Re: Philips 47pfl6877h/12

I have one set here exactly the same problem.

[Jimmy1979]

Re: Philips 47pfl6877h/12

I have one set here exactly the same problem.

Did you find solution for it?

[rickou]

Re: Philips 47pfl6877h/12

No still looking

[Jimmy1979]

Re: Philips 47pfl6877h/12

No still looking

Oke good luck.
I ordered an other mainboard.

[shaibuch]

Re: Philips 47pfl6877h/12

i have a 40pfl4708/f8, swapped out a main from another set, but need to change the panel type, ive done this before but i cannot remember the sequence to do it. i know you do not go into an actual menu, but rather just type in the code and it will switch the panel automatically.

I would really appreciate any help
thanks

[rickou]

Re: Philips 47pfl6877h/12

Hope this help