Announcement

Collapse
No announcement yet.

SAMSUNG UN50EH5000 dead no power

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    SAMSUNG UN50EH5000 dead no power

    It looks like it dead when i plug it in no pic no sound no red light on the power button. i checked the outlet, it has power, i checked the power cord on another TV and it worked. I replaced the 3 boards in the TV, the power board, main board, and T con. still no lights anywhere. Any ideas on what it could be?

    #2
    Re: SAMSUNG UN50EH5000 dead no power

    Unplug the cable from the Power Bd to the Main Bd. Plug in TV to AC. Do the backlights come on?

    Comment


      #3
      Re: SAMSUNG UN50EH5000 dead no power

      no, they did not.

      Comment


        #4
        Re: SAMSUNG UN50EH5000 dead no power

        Psu faulty then, also make sure you have DC V across the fioter caps. Throwing boards at it is pointless and a waste of money you need to diagnose it.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment


          #5
          Re: SAMSUNG UN50EH5000 dead no power

          Need good clear sraight on pictures of back of tv with cover off and each board.
          Need voltages from connector that goes from power supply board to main board. Will need pin#-pin label-Pin voltage in standby-Pin voltage when pushing power button and picture of connector on power supply board.
          Format:
          Pin# - Pin Label - Pin Voltage standby - Pin voltage power on
          1 - XXXXXXX - XXv - XXXv
          2 - XXXXXXX - XXXv - XXXv
          3 - XXXXXXX - XXXv - XXXv
          4 - etc.
          I assume no responsibility for any stupid suggestions I might post.

          Comment


            #6
            Re: SAMSUNG UN50EH5000 dead no power

            Originally posted by dskall View Post
            need good clear sraight on pictures of back of tv with cover off and each board.
            Need voltages from connector that goes from power supply board to main board. Will need pin#-pin label-pin voltage in standby-pin voltage when pushing power button and picture of connector on power supply board.
            Format:
            Pin# - pin label - pin voltage standby - pin voltage power on
            1 - xxxxxxx - xxv - xxxv
            2 - xxxxxxx - xxxv - xxxv
            3 - xxxxxxx - xxxv - xxxv
            4 - etc.
            +10
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment


              #7
              Re: SAMSUNG UN50EH5000 dead no power

              Could be PSU issue or Backlights issue....I would think it is the latter...However, it could be a combination of both........We do need the information dskall asked for to make a proper determination.
              Last edited by Andrew F. Ali; 03-25-2017, 08:41 AM.

              Comment


                #8
                Re: SAMSUNG UN50EH5000 dead no power

                main supply fuse might be blown on both power boards . check with your meter with power removed .

                Comment

                Working...
                X