Two LG TVs having issues. 50pc5d and 42pt350.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Lavitz
    Member
    • Mar 2017
    • 14
    • United states

    #21
    Re: Two LG TVs having issues. 50pc5d and 42pt350.

    Any ideas where to go from here?

    Comment

    Related Topics

    Collapse

    • gretti
      MSI Z370-A Pro, works but does not power off or reboot and USB issues
      by gretti
      I have a MSI Z370-A Pro. The board does not reboot or shut down from the Windows recovery console. USB communications stop and the status light on USB 1 stays on and does not blink. I have programmed a new BIOS with a CH341A programmer already, swapped RAM, PSU, CPU. The board will power off when the power button is held and resets when the reset switch is pressed, but it will not react to the reset switch if already told by software to shut down or restart. The board will reboot from BIOS after a save and exit command.

      The MSI BIOS included the ME firmware for the board. The size...
      10-16-2025, 02:14 AM
    • dcbw
      PowerMac G5 ACBel 614-0303 buzzing
      by dcbw
      The PSU works, but shortly after powering on (either in the G5, or by shorting the power-on pin to ground) it begins buzzing loudly. It also makes the LED lights connected to the same circuit flicker. It's definitely a buzzing, not a high pitched whine.

      The buzzing seems to come from the high voltage side of the board, perhaps from the white relay. Could the relay be bad, or could the 5V supply be bad enough that it's unable to keep the relay on? Any pointers to help isolate the issue? Thanks!

      Other info: API2FS34, ID 291, Date B0404
      05-31-2024, 07:13 AM
    • Nagyesz
      Lenovo IdeaPad Gaming 3 15ACH - Ideapad 3 well known solder joint issues
      by Nagyesz
      I have a Lenovo IdeaPad Gaming 3 15ACH, which has started exhibiting the well-known issues of the Lenovo IdeaPad 3.

      All stress tests run perfectly, and there are no performance issues. However, the solder joints are almost certainly starting to fail. If the top two screws on the back are not screwed in, moving the screen results in a BSOD or, in some cases, a slight artifact and freeze. This is a 2023 notebook..

      How can I extend its lifespan? Could reflow help?

      It has ryzen 5 5500h, rtx 2050, no soldered ram.

      Example of the artifacts:
      ...
      03-01-2025, 11:11 AM
    • pwnjuice
      Bitlocker issues
      by pwnjuice
      Customers laptop had a Motherboard go bad and replaced it. they want to try to get data but. I am having bitlocker issues. I will list below

      Issue 1: When connect the drive to my computer to decrypt it I get this message. "there are no supported protectors on this drive the drive cannot be unlocked"

      Issue 2: When I run powershell as admin and try manage-bde -protectors -get e: I get this message. " ERROR: An attempt to access a required resource was denied. I also get the same error when I try manage-bde -status e: When I try the same with terminal with
      ...
      01-06-2025, 05:33 PM
    • Skgod
      Asus Rog strix g15 g513ih hn0865 and it's having display issues while running on igpu
      by Skgod
      Hey I am having Asus Rog strix g15 g513ih hn0865 and it's having display issues while running on igpu. Works fine when I open any game or whatsapp windows application. The issues are :
      Black screen, freeze
      The weird thing is that when as long as the laptop is running on igpu the problem keeps happening. But as soon as I open any game or whatsapp windows application, the laptop works completely fine.
      When the screen freeze or black screen I used to move the display lid up and down and it usually works like that.
      So can anyone tell me what would be the possible cause?...
      10-16-2024, 08:11 PM
    • Loading...
    • No more items.
    Working...