Help with sharp 46d82u

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JXpress
    New Member
    • Mar 2017
    • 4
    • Canada

    #1

    Help with sharp 46d82u

    When plugged in the relay clicks on and off a few times then i get the power and opc blink once and then the green power blinks twice by itself. by reading the service manual i believe this is the "Initial communication from the main CPU is not received". I have the service manual but I've never dug this deep into elactronics before (i'm quite savvy and have worked with ac/dc voltage alot.) i have tested the power 12 pin "PH" pin going to the main board and this is the readings i'm getting when trying to power on:
    1- 12.4v
    2- 0
    3- 0
    4- 0
    5- 0
    6- 0
    7- 21v
    8- 21v
    9- 0
    10- 0
    11- 28.6
    12- 28.6
    then i checked the 6 pin "PD" connected on the main board:
    1- 5.6v
    2- 5.9v
    3- 0
    4- 0
    5- 10.1v
    6- 0
    i'm not sure if these numbers are good or not, most other boards i've seen are clearly labeled but this sharp one has no labeling on it, and i have like 14 main board schematics in the service manual i have lol. any help is greatly appreciated and sorry for all my noobness
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Help with sharp 46d82u

    Without the pin names for all those pins with the Voltage readings, no way we can tell what they mean., is the other end of the connector that goes to another board has label for the pins?
    The more details you provide the better help you will get.
    We are doing remote troubleshooting without having the unit in front of us to kook at, so please provide good clear pictures of the boards and the whole back side of the TV showing all the boards.
    Last edited by budm; 03-12-2017, 10:19 PM.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • JXpress
      New Member
      • Mar 2017
      • 4
      • Canada

      #3
      Re: Help with sharp 46d82u

      no the other end does not have any markings, although i have not taking the main board out of the unit to see the back of it but i pulled the power board out and it has no markings. i have attached some pics of the rear of the unit, the main board, the power board and also the pins between both of them i checked for voltage at.
      Attached Files

      Comment

      Related Topics

      Collapse

      • advant
        Driving a Sharp TCON/panel with a universal main board
        by advant
        This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

        I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
        02-03-2020, 12:25 AM
      • Dani_2024
        Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
        by Dani_2024
        Hi and thanks in advance for any input you might provide!
        I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
        Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

        Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
        10-28-2024, 05:06 PM
      • jb_Bak
        Sony xbr-65x900c main board issues?
        by jb_Bak
        Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

        Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
        Power Board Connector that goes to Main board
        CN6401
        Pin 01 NC
        Pin 02 NC
        Pin 03 "BL_ON": 0V
        Pin 04 "N/C"
        Pin 05 "STBY 3.3V": 3.5V
        Pin 06 "GND": N/C
        Pin 07 "AC_OFF"...
        09-27-2021, 04:52 PM
      • JDC
        (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
        by JDC
        ONN 100012588
        Issue: No Power, Then Rebooting After Main Board Change

        Short answer: replace main board and power board
        Technical answer: replace main board and Q306 & Q307 on power board.

        Long answer:

        TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
        07-15-2022, 07:39 AM
      • m1ch43lzm
        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
        by m1ch43lzm
        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
        05-12-2025, 08:37 PM
      • Loading...
      • No more items.
      Working...