Philips 32pfl5203 ,dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rawan
    Senior Member
    • Oct 2009
    • 57
    #1

    Philips 32pfl5203 ,dead

    Hi
    Experts

    I have philips tv for dead, no stand by front led, i have 3.3 standby voltage from power supply, that means Main ic get the supply but when i measure oscillator on crystal ,no oscillation,
    Does that mean main ic bad or crystal bad?? what i thinking once Main ic get supply oscillator should work ,
    Thanks
    Mac
    Tags: None
    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa
      #2
      Re: Philips 32pfl5203 ,dead

      When you force power supply on do you have all voltages?
      I assume no responsibility for any stupid suggestions I might post.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • Andreas_de
          Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
          by Andreas_de
          Hello!

          i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
          Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

          Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
          ...
          2 Photos
          04-12-2025, 10:38 AM
        • sam_sam_sam
          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
          by sam_sam_sam
          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
          03-31-2024, 02:12 PM
        • kevin_allein
          Samsung QE 75 Q 7 FGMTZG Power Supply dead
          by kevin_allein
          Hi, have this Samsung QE 75 Q 7 FGMTZG TV with no function. First analysis shows the power supply board is dead and fuse blown. Power Supply has the number BN94-11439A. I did short circuit test transistor and diodes and those do not appear to have shorts. I must admit I did not look at every single data sheet.
          In the TV was some black dust residue, so probably one of the electrolytic caps blew, but they do not show short either.

          Does anyone have schematics for that board ?
          Any good tip, what could be the issue ?
          ​
          02-27-2025, 12:15 PM
        • KYBOSH
          Eufy Floodlight Cam 2 Pro Dead. Power Supply issue...
          by KYBOSH
          I have a floodlight-security camera that recently died on me.



          its hardwired to 115v po115v outlet. One evening it simply died. After some troubleshooting (ensuring it had power and ensuring the electronics were actually functional by supplying 5v via usb port) i realized the power supply must be the issue. The supply was noticably warm to the touch even though it was not powering anything.

          Trying to understand what i was up against i went looking for others with similar issues and anyone who might have attempted a repair. While a few ppl have had the...
          07-01-2024, 06:54 AM
        • Loading...
        • No more items.
        Working...