Hi
I have Moser Baer tv , chassis 17MB35 , MCU is MST6WA7GQ
Tv some times work ok , somethimes front led blinking problem,
I change all caps in power supply, i run tv with power supply and inverter by applying power on signal and backlight voltage to smps ,without motherboard,
tv runs ok but with Main board tv sometimes works or front led flashing,
even i did spi flash program but still same problem, i heard that i need boot bin file comes with some other files load in usb and with usb insert in tv problem can be solved,
Please...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
need Vestel 17MB35-4 Boot file bin
-
Re: LG LED TV, all service data lost, EZ_ROUTE etc.
Hi
Diah The photo i upload is not from my tv. In photo u can see some value next to tool option but in my case all are ZERO. TOOL OPTION 1 to 6 all are ZERO. It does not stored in memory. I want to know which eprom chip is store all this data.
Thanks
Mac
-
LG LED TV, all service data lost, EZ_ROUTE etc.
Hi
Experts
I have lg led tv, only A/V working ,i open service mode with service remote and i found all service data in EZ_ROUTE all tools option is zero , and if i enter data it wont store, i reprograme both chip 24c16 and W25Q20 but still same problem,
Any help please
Mac
I have attached sample image....
-
SAMSUNG PN43E490, dead led blink 6 times
Hello experts
SAMSUNG PN43E490, dead found transistors Q5000, Q5001 and Q5036 Short on Y Main board LJ41-10136A OR LJ92-01854A
I need schematics of this board and part no. of this transistors.
Thanks
Mac
-
Panasonic TH-P42X20V, NO a/v Hdmi input ok
Hi
Panasonic TH-P42X20V, NO a/v Hdmi input ok
may be firmware problem, but dont have firmware,
i can not see AV SW option when i open service menu, i have attached a image of working tv service menu.
any help would be great
Thanks
Many...
-
Need firmware samsung led tv
Hi
I need firmware of Samsung chassis N88A
Thanks
Mac
-
Philips 32pfl5203 ,dead
Hi
Experts
I have philips tv for dead, no stand by front led, i have 3.3 standby voltage from power supply, that means Main ic get the supply but when i measure oscillator on crystal ,no oscillation,
Does that mean main ic bad or crystal bad?? what i thinking once Main ic get supply oscillator should work ,
Thanks
Mac
-
Re: Weird problem while programming eprom
sorry guys ,
set return to customer, as it is
Thanks
Mac
Leave a comment:
-
Re: Weird problem while programming eprom
Hi
here is bin file,
Thanks...
Leave a comment:
-
Weird problem while programming eprom
Helo
Experts
I have Onida led tv Model LEO24FRD, eprom ic 25q32,
I try to upload firmware and tv works fine but as soon as i switch off/on tv ,tv went to standby mode,same problem, I replaced eprom ic ,still same prblem,
Micro controller used in this is TUSNV59XUS
Any help please.
Thanks
Mac
-
which pin need to disconnect in inverter board??
Hi
Usually on Inverter board there are 3 assign pin, ERROR, DIM and inverter on/off
Which pin need to remove or disconnect to activate inverter board??
Thanks
Mac
-
Samsung LA32B530 distorted audio on A/V
Hi
I have samsung LA32B530 model ,has distorted audio on A/V but sound ok on HDMI, any help please.
Does this tv has any option in service menu??
Thanks
Mac
-
Philips 42pfl7977,in standby only
Hi,\
I have Philips tv , only front led on, nothing else, no power on with remote or front control,
Any help please,
I have upload pict. of Main board.
Is it possible to upload software in this condition??if it is software problem
Thanks
Manoj...
-
Need datasheet IC BM81202 ,SONY LCD TV
Hi
I Need datasheet IC BM81202 ,SONY LCD TV,
used in panel Y320AN03S4L
Thanks
Mac
-
Samsung LA32B530 NO SOUND
Hi
I have samsung LA32B530 ,NO SOUND, sound ic and voltages looks ok,
is it eprom problem?? does anyone have schematics or eprom data??
How to upload software in this tv??
Thanks
Mac
-
-
need samsung T-CON board schematics
Hi
i need schematics of T-CON Board, BN 41-01797
There is a lining on screen but if i touch somewhere near t-con IC SM4152 pict. looks ok , i also need pdf of IC SM4152.
I have upload a image of board .
Thanks
Mac...
-
Re: Sony 32BX311 T-CON Board problem
Hi
I have just upload a image of board i have. i have 12v on both side of fuse but no any other voltages.
Thanks
Leave a comment:
-
Re: Sony 32BX311 T-CON Board problem
Hi Friends
i am uploading new image of that board with indication of voltages which is not there ,i have only +12 v.,
if u have a schematics of this board please upload. Thanks
Mac...
Leave a comment:
-
Re: Sony 32BX311 T-CON Board problem
Hello
sir,
I have attach zip file ,please have a look
Thanks
Mac...
Leave a comment:
No activity results to display
Show More
Leave a comment: