When replacing an eeprom for this tv, can the new be installed or does it have to be programmed first? What happens if it is not programmed?
Vizio Vf551xvt- eeprom
Collapse
X
-
Re: Vizio Vf551xvt- eeprom
It's like having a body with no brain - nothing happens. -
Re: Vizio Vf551xvt- eeprom
Depends what you mean. Are you buying a blank EEPROM brand new from Digikey or something, or one specifically for your TV, from a place like ShopJimmy that would sell it pre-programmed?"Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
-
Re: Vizio Vf551xvt- eeprom
Yes, places like ShopJimmy sell programmed EEPROMs. You may also be able to find them on eBay or such.
Do a Google search for EEPROM + your board's model number."Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
Related Topics
Collapse
-
by edgarmg15Hi everyone
I´m trying to repair a TV Vizio E320-A0 that I found in the street
The symptoms are it doesn't respond with remote or buttons, the LED indicator is always off and also there is no image on the TV.
The power supply board works fine (I probed the terminals with my multimeter) but in the main board the EEPROM doesn't works correctly because the voltage on the pins doesn't match with the parameters of the datasheet.
So, I´m going to replace the EEPROM with a new one, but the problem is that my programmer (CH341a)... -
by JaneAnyone knows if ,these days,new KB9022QD must be programmed when replacing faulty SIO in Acer Aspire 3 (dh5jv la-g021p Rev:1) ?
-
by TechGeekNot sure if this is the right place for such a request. If not, please move to the appropriate place.
I've got a DTK PAM-0055I (zero zero five five eye) motherboard whose flash BIOS has been completely and totally trashed. Someone had set the EEPROM voltage to +12V and fried the Winbond W29EE011-15 EEPROM. (I'll make sure that that won't happen again by snipping the +12V pin off of the responsible configuration header.)
Anyways, is it possible that I could have someone program a Winbond W29EE011-15 EEPROM with a BIOS image for a DTK PAM-0055I motherboard?...-
Channel: BIOS & Schematic Requests!
-
-
I tore apart my instrument cluster for my 2008 Toyota Corolla made in 2007 in Cambridge, Ontario, Canada and pcb location: IC6=EEPROM is a surface mounted device with part # of 93C46W7, some claim the EEPROM out of a Camry part # 93C56 will allow odometer to roll over 299 999 KM or miles. The data sheet for both is below:
https://cdn.badcaps-static.com/pdfs/...c6e42b20d3.pdf 2
Anyone know if the Camry one will work on my Corolla?. And which EEPROM reader/writers do you all recommend I purchase that will allow me to read the old values of the old... -
by x_orange90_xI've had this monster for several months as I've hesitated to order backlights for it. Finally did order them and they are due to arrive tomorrow. Besides having ample space to work, are there any recommendations for working on such a massive screen? Should I remove the panel by myself or would 2 people be a better choice? I bought the double-cup suction cups from Harbor Freight and have been using them for the last few repairs on smaller screens. They are far superior to the single cup orange ones I used previously that would often let go without warning 😱.
I have not replaced... - Loading...
- No more items.
Comment