Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
@_@
@_@
-
Last edited by syaoran123; 01-11-2017, 09:56 AM. -
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Hmm odd, I used them to sub30f131.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Are they normally small? Heres what the packaging looks like and a size comparison.Attached FilesComment
-
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
FGD4536TM is working perfectly even from RS. Batch from rs ends with AA i think.
Maybe you got a bad one? Voltages going to ysus are ok? 215v?I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Yes they are small. Did not have a problem with these tbh.I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Its working when i substituted them with another part :/Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Maybe you subbed them in the wrong area ?Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Not to mention... I had made another attempt previously with another board. Both times failedComment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Take a look at my job. It may look ugly, but it works good as new.Attached FilesComment
-
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
I dont know why your fets blow up but i dont have any problems with the fgd4536tm. All my repairs work with these fets.I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Very peculiar. And the fgd's are so much smaller and easier to work with. I'm just not having any luck.Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Hmmz back to the drawingboard. The last board with the missing pad turns on but the picture is not good. TPVsus is 215v so thats good.
Board does the same in a different tv. Its a problem somewhere in the recovery section and i think it happened after rjp63g4 exploded taking out IC921.
Service manual does not list all the components so my best bet is replacing the whole left side around ic921.
Anyone any suggestions? The screen slowly comes to live...Attached FilesI only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
-
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Rebuilding TNPA5330 , TNPA5349 & TNPA53305
Good day! I have some problem with my tnpa5349 , after change four shorted 30f131 (i install rjp3047 without d-pak diodes, i forgot name those near 30f131) and rjp63g4 (i install rjp62k2 )- it worked perfectly on previus repaired tnpa board , sn board worked, but image is not good -very high brichtness on medium settings of brightness and contrast and many different color points all of screen. I was cheking all tiny transististors and diodes near with fets and igbt, all is ok. Need yor help thank youComment
-
I ordered 50 FGD4536 ibgt's from them and recieved 50 fucking blanks, useless Chinese forgeries for $44. I can get a full refund if I spend at least $15 to ship the garbage back to China for some other person to buy. I decided I would like to publicly disgrace them and just eat the $44. They advertised them as used but working. They came in a strip of new FAKES that looked nothing like the real ones. BEWARE OF THOSE SHADY BASTARDS!
-
Hi,
I have an Asus Rog Strix B360-I Gaming with missing parts. I know there is a resistor missing for sure, but nearby it seems there might have been also a transistor or mosfet. Below the picture of the area on the board with the missing parts. The interesting area is inside the rectangle.
I'd appeciate if somebody could make a detailled picture of this area from a working board and post it here. Getting the parts values would also be helpful. The revision of the board is 1.02 .
Thanks in advance... -
I decided to take one of the Rubycon capacitors out of a phat Xbox 360 with a Zephyr motherboard and noticed that all the Rubycon capacitors near the CPU were fake. The capacitors in question are Rubycon MFZ 680uf 6.3V and they all have a bullseye bottom, something not found in genuine Rubycon capacitors. None of them were leaking, they all have the K top, and the system has never been opened before. It appears Microsoft was using fake capacitors in the Xbox 360, or the Chinese facility where the console was manufactured in was using them and passing them off a genuine. Just thought I'd share... -
Hello to all.
may I have a question about these Semiconductor parts BQ24800RUYR? can it be replaced with these parts BQ24780SRUYR?
I need some good advice and also some information about it. thank you and God Bless... -
I read in quite a few of the requests for help on plasma sets, the concerns over hard to tell fake replacement parts and the damage they do when fitted and blowing the circuit boards. Because these parts are no longer available from the original suppliers the Internet appears to be the only place to find them.
Many members have through trial and error found suitable substitute replacements still currently available through official supplier.
Would it be an idea to have a thread giving the suggested replacement parts for hard to get components.
Just...
Comment