hello all i have a ps4 console that there is no display on tv i would like to know what is the voltage output for hdmi i thing all hdmi outputs are the same or i am wrong thanks
-
-
Re: ps4 hdmi problem
Think you need to replace the HDMI connector to get it working again. They fail for some reason. I think all hdmi connectors only have 5V.I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
-
Re: ps4 hdmi problem
5v to every pinComment
-
I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
Re: ps4 hdmi problem
It is very possible to have a hardware failure like MN86471A HDMI IC.The art of fighting without fightingComment
-
Re: ps4 hdmi problem
https://www.youtube.com/watch?v=-glW2Mv-XKs
https://www.youtube.com/watch?v=8Gi6B-uatucLast edited by vinceroger69; 10-02-2016, 02:25 PM.Comment
-
Hi there,
Tried to condense the problem in the title. Hope it was appealing for someone.
I bought a broken PS5 with 2 sek. BLOD. When it arrived I noticed the bad condition of the console housing, bent cooler pipes and deformed disk drive. Yeah , obviously very bad drop damage. And obviously not appropriately described in the offer. Because it was my first hand on a PS5 for an okayish price, I decided to take the risk.
It is an EDM-020 CFI-1116A.
First thing I noticed was wrong initialization amperage. It went to 450 mA an then dropped to around 150 mA. Figured... -
I have an LG Plasma TV 60PM6700 for the past ~12 years.
In the last ~3-4 months I have been having some issues.- Problem: It started with random picture disappearing (sound still worked).
Frequency: Happened about once a week.
Solution: Had to turn off TV wait a few seconds before turning it on again. - Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
Frequency: Happened about once a week.
Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve. - Problem: TV shuts down
- Problem: It started with random picture disappearing (sound still worked).
-
Hey all, I have one last thing I'm looking to fix with my Synthaxe. This time, the schematics I have are actually the same as the PCBs I have.
The Synthaxe, works as its a guitar midi controller hooked up to a floor pedal. Thats the most basic way of using it, and it has a midi output. You also can connect a console to it, that stores your tunings and other things. The console has 8 midi outs, as well as a midi in and midi thru.
When I first got the unit, I thought I was using it wrong, but it turns out its just broken. The 8 midi ports on the console don't output... -
Hello. I have a problem with a PS5 console that I bought to learn electronics repair. The auction description indicated that the console had been dropped. The HDMI port and USB ports were damaged. The HDMI port was replaced by the previous owner, and after his repair, the console worked for 2 days and then became dead. After receiving the console, I replaced all the USB ports. After replacing them, the console started to turn on. On the logo screen, it displays "too many USB devices connected". My further attempts to fix the error involved replacing the Southbridge, 4 TPS2001D chips,... -
Hi, guys!
I am not a professional, all I can do is solder stuff on the boards, so I would really appreciate it if someone with knowledge shares his experience/thoughts on a problem I have with a PS4 console.
My friend gave me an original fat PS4, board model SAB-001, with WLOD, that has been previously opened. I changed the HDMI port, couple of pads on the board were ripped, which I connected to the corresponding caps/resistors? Just did so as in a shown diagram (one of the ground pads I ripped off and left it not connected). However, there was still no signal, so...
Comment