BUSH LC39GL12L - Stuck on standby light

[ReeceyBurger123]

Re: Bush LC39GL12F not switching on

Epprom issue.

[vinceroger69]

Re: Bush LC39GL12F not switching on

yes i agree i think in the other thread we recommended he messaged/rang ohm supplies

[ReeceyBurger123]

Re: Bush LC39GL12F not switching on

yes i agree i think in the other thread we recommended he messaged/rang ohm supplies

Yep of course he wouldn't know that probably didnt even do any research on this board/set.

[melonslug]

Re: Bush LC39GL12F not switching on

Ok thanks RJ i will repost it there. Vince and Reecey I know you recommended ohms supplies but that was for the replacement board problem, this problem is different in that the voltages on output of power board stay when main board is connected so I thought it may be a different fault than the eeprom. However If you good folks still feel this is still an Eeprom fault then it seems that I have two boards, both with an eeprom problem with different syptoms. I didn't want to pay out for a new pre programmed Eeprom if it wasn't the problem.

[melonslug]

Bush LC39GL12F not switching on

Hi. I have the above tv that has stopped working.When I turn it on there are no lights on, not even the red standby and obviously no screen. I have checked the power supply board and all the correct voltages are present at the output. On the main board ( t.msd306.68a 12023 ) I am getting output voltages at the terminals that lead to the LEDs, (but like I say no lights on).They read brown 5v, red 1.7v, yellow3.5v. I don't have voltages however at the terminals which lead to the cluster to the standby, volume, channel etc buttons.Any help will be much appreciated.

[vinceroger69]

Re: Bush LC39GL12F not switching on

what power board does this set use? if there a pin marked bl on (backlight on) if so what does that measure

[ReeceyBurger123]

Re: Bush LC39GL12F not switching on

Reported for making THREE USELESS threads !

[Topcat]

Re: BUSH LC39GL12L - Stuck on standby light

^
All 3 merged into one.

[vinceroger69]

Re: BUSH LC39GL12L - Stuck on standby light

If this was a set i was working on i would send your replacement mainboard back for a refund as not working then maybe try a eeprom if you can get one for your original board and see if that solves the issue your having.

[melonslug]

Re: BUSH LC39GL12L - Stuck on standby light

Ok cheers vinceroger. Hey Reeceyburger! stick your fucking head up ya arse you miserable ol toad!!!!

[vinceroger69]

Re: BUSH LC39GL12L - Stuck on standby light

reece wasnt be miserable as you say, when you have been helping people on forums for a while like we have its just easier if it all stays in one thread also if other people have the same tv with a fault and have come across this thread its all here including any tests and voltage readings etc.

[ReeceyBurger123]

Re: BUSH LC39GL12L - Stuck on standby light

Man fuck you ignorant motherfucker, shove the Tv up your slug of a wife's arse and fuck on with it little prick now go and report me or make some threat you cant take out USELESS TWAT tried to help and you was ignorant

[melonslug]

Re: BUSH LC39GL12L - Stuck on standby light

OOH you kinky beast ReeceyBurger! My wife enjoyed that very much, thanks for rekindling our sex life! Listen man I was merely sending posts to request help, I was grateful of your help but I don't see why you had to be all wanky and stroppy and suddenly put that post "Reported for making THREE USELESS threads !" I won't report you as that ain't how I do things, I treat people how they treat me, when someone gets a stroppy twat with me I give it back twice as bad. Up til that point I was grateful of your help. Watch your step little boy!!!!!

[melonslug]

Re: BUSH LC39GL12L - Stuck on standby light

Vinceroger, Thanks for your help I will check out the bl on the power board if it has one. thanks.

[ReeceyBurger123]

Re: BUSH LC39GL12L - Stuck on standby light

Ahh boohoo ignormanouse

[melonslug]

Re: BUSH LC39GL12L - Stuck on standby light

Ignoramus, I think is the word you're looking for Reecey. Do get your spellings right. Oh and eeproms arn't the only answer to every post you know! Blimey, now I'm giving you some help!