Hi friends,
I'm tired of this LCD TV that doesn't stop breaking. This time, I can't troubleshoot this. The TV has a Vestel PSU 17PW22-4 and main board 17MB12-3. The problem is it goes to stand by state randomly, it's a very hard problem to replicate although it seems to happen more often when the TV has been resting without use. Some time I've seen the LED blink several times after shutting down, but not always.
I've checked everything I can think of. I reckon the PSU is good and so they are the inverter board and tubes. If I disconnect the inverter board from the PSU it makes no difference, although obviously there's no backlight. The PSU voltages are OK.
I think the problem is in the main board, maybe in the main chip VCT6953P which gets very hot (+60 ÂșC), but I think it may be normal. I resoldered most of the PCB down side as part of a previous reparation.
I will attach diagrams of the PSU and main board.
Some idea? Thank you.
I'm tired of this LCD TV that doesn't stop breaking. This time, I can't troubleshoot this. The TV has a Vestel PSU 17PW22-4 and main board 17MB12-3. The problem is it goes to stand by state randomly, it's a very hard problem to replicate although it seems to happen more often when the TV has been resting without use. Some time I've seen the LED blink several times after shutting down, but not always.
I've checked everything I can think of. I reckon the PSU is good and so they are the inverter board and tubes. If I disconnect the inverter board from the PSU it makes no difference, although obviously there's no backlight. The PSU voltages are OK.
I think the problem is in the main board, maybe in the main chip VCT6953P which gets very hot (+60 ÂșC), but I think it may be normal. I resoldered most of the PCB down side as part of a previous reparation.
I will attach diagrams of the PSU and main board.
Some idea? Thank you.
Comment