Goodmans PVR gd11fvrsd32

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Acton-Hilton
    Member
    • Jun 2008
    • 13

    #1

    Goodmans PVR gd11fvrsd32

    I've been asked to look at one of these - sits there with a green flashing LED, any remote commands, result in 777 on the TV screen. No obvious Caps bulging - the PSU caps are marked XU in the main, several other makes of cap on the main board. PSU is marked juw7.820.00052157.

    Any one come across this one??
    Thanks
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6642
    • Wales

    #2
    Re: Goodmans PVR gd11fvrsd32

    Have you any photo's of the board and taken any measurements.
    Willing to help but I'm no expert.

    Comment

    • Acton-Hilton
      Member
      • Jun 2008
      • 13

      #3
      Re: Goodmans PVR gd11fvrsd32

      Originally posted by dick_barton
      Have you any photo's of the board and taken any measurements.
      Not yet, just wondering if anyone has worked on these boxes before?

      Comment

      • Acton-Hilton
        Member
        • Jun 2008
        • 13

        #4
        Re: Goodmans PVR gd11fvrsd32

        Ok it is now fixed.
        There are 2no 1000uf 25v I replaced, 3no 470uf 25v also replaced + the main smoothing 33uf 450v - which left it's Neg connection behind when de-soldered - I suspect it had gone OC there, & that was the main fault.

        I hope this helps anyone else with the odd obscure fault on this nice Freeview recorder. They are nice & quiet, with a laptop HDD 320,500 or upgradable to at least 750gb.
        Bob

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain

          #5
          Re: Goodmans PVR gd11fvrsd32

          Cheers, you got an images at all though please ?
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

          Comment

          • Acton-Hilton
            Member
            • Jun 2008
            • 13

            #6
            Re: Goodmans PVR gd11fvrsd32

            Originally posted by ReeceyBurger123
            Cheers, you got an images at all though please ?
            Here is the user guide
            This may have been a one off, but the main electrolytic is C05 - I suspect this was really the only fault, as all the rest of the Caps looked OK.
            A lot of these boxes, have been sold By Tesco & Sainsburys though - they are normally pretty reliable - if a bit insensitive.

            Comment

            Related Topics

            Collapse

            • cheeky2
              Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
              by cheeky2
              I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
              Obviously the same LVDS connector for the screen connection...
              05-25-2024, 03:27 AM
            • Dani_2024
              Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
              by Dani_2024
              Hi and thanks in advance for any input you might provide!
              I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
              Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

              Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
              10-28-2024, 05:06 PM
            • Asraf Atb
              Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
              by Asraf Atb
              Hi everyone,

              Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

              Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

              I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
              01-27-2025, 05:02 PM
            • JSin21
              Compatibility of main boards between different variations of samsung MU6100
              by JSin21
              Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

              I have Samsung Smart TV UA65MU6100WXXY version DA01

              Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
              11-27-2023, 04:54 AM
            • jb_Bak
              Sony xbr-65x900c main board issues?
              by jb_Bak
              Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

              Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
              Power Board Connector that goes to Main board
              CN6401
              Pin 01 NC
              Pin 02 NC
              Pin 03 "BL_ON": 0V
              Pin 04 "N/C"
              Pin 05 "STBY 3.3V": 3.5V
              Pin 06 "GND": N/C
              Pin 07 "AC_OFF"...
              09-27-2021, 04:52 PM
            • Loading...
            • No more items.
            Working...