Hi,
Original problem with the TV was 14 blinks code (faulty t-con)
Checked the t-con and found blown fuse (F1 - 7 Amp)
Replaced with 5 Amp, fuse OK.
TV stays on, sound is working fine, backlight is ON but still no picture.
Must be faulty t-con, fuse is fine now but not sure why blown before.
What else should I check / change on the t-con to make it working.
Thank you.
Original problem with the TV was 14 blinks code (faulty t-con)
Checked the t-con and found blown fuse (F1 - 7 Amp)
Replaced with 5 Amp, fuse OK.
TV stays on, sound is working fine, backlight is ON but still no picture.
Must be faulty t-con, fuse is fine now but not sure why blown before.
What else should I check / change on the t-con to make it working.
Thank you.
Comment