Sanyo DP42740 Short on Main Board?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #21
    Re: Sanyo DP42740 Short on Main Board?

    seems odd it powered up yesterday but not today do these sets suffer eeprom issues? would this cause your fault?

    Comment

    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales

      #22
      Re: Sanyo DP42740 Short on Main Board?

      Need to take a step back.
      Describe exactly what the symptoms are now at this time.
      Eg. Switch on, backlights / no backlights, picture / no picture etc
      Willing to help but I'm no expert.

      Comment

      • caphair
        Badcaps Legend
        • Nov 2011
        • 1249

        #23
        Re: Sanyo DP42740 Short on Main Board?

        I'm not sure. If the original eeprom was bad and the replacement board wasn't shouldn't it have worked?

        Comment

        • caphair
          Badcaps Legend
          • Nov 2011
          • 1249

          #24
          Re: Sanyo DP42740 Short on Main Board?

          Originally posted by dick_barton
          Need to take a step back.
          Describe exactly what the symptoms are now at this time.
          Eg. Switch on, backlights / no backlights, picture / no picture etc
          Turn on, relay clicks twice power led on then 3 seconds later no power led and turns off. Let's you try 3 times before locking you out until you unplug from mains

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #25
            Re: Sanyo DP42740 Short on Main Board?

            do what dick barton says in post 22 first but maybe if eeproms are troublesome on these sets your replacement could be faulty too i guess if board was untested ive no idea my self just a thought i had.

            Comment

            • dick_barton
              Badcaps Legend
              • Aug 2015
              • 6642
              • Wales

              #26
              Re: Sanyo DP42740 Short on Main Board?

              Disconnect the power supply from all the other boards and jumper PS_ON to 5V Standby using a 1K resistor and check what supplies come up.
              Last edited by dick_barton; 07-19-2016, 12:55 PM.
              Willing to help but I'm no expert.

              Comment

              • caphair
                Badcaps Legend
                • Nov 2011
                • 1249

                #27
                Re: Sanyo DP42740 Short on Main Board?

                Originally posted by dick_barton
                Disconnect the power supply from all the other boards and jumper PS_ON to 5V Standby using a 1K resistor and check what supplies come up.
                Tried that I get all supply voltages

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk

                  #28
                  Re: Sanyo DP42740 Short on Main Board?

                  sorry just realised this is a plasma so doubt if its eeprom related did you read this thread not sure if its the same issues your having
                  https://www.badcaps.net/forum/showth...=Sanyo+DP42740

                  Comment

                  • caphair
                    Badcaps Legend
                    • Nov 2011
                    • 1249

                    #29
                    Re: Sanyo DP42740 Short on Main Board?

                    Originally posted by vinceroger69
                    sorry just realised this is a plasma so doubt if its eeprom related did you read this thread not sure if its the same issues your having
                    https://www.badcaps.net/forum/showth...=Sanyo+DP42740
                    That's interesting poster had same tv and same symptom but ended up being the SN board that fixed it. How's that make any sense? Lol

                    Wonder how I could troubleshoot the SN board for this symptom. Nothing seems shorted on it

                    Comment

                    Related Topics

                    Collapse

                    • Dani_2024
                      Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                      by Dani_2024
                      Hi and thanks in advance for any input you might provide!
                      I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                      Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                      Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                      10-28-2024, 05:06 PM
                    • jb_Bak
                      Sony xbr-65x900c main board issues?
                      by jb_Bak
                      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                      Power Board Connector that goes to Main board
                      CN6401
                      Pin 01 NC
                      Pin 02 NC
                      Pin 03 "BL_ON": 0V
                      Pin 04 "N/C"
                      Pin 05 "STBY 3.3V": 3.5V
                      Pin 06 "GND": N/C
                      Pin 07 "AC_OFF"...
                      09-27-2021, 04:52 PM
                    • m1ch43lzm
                      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                      by m1ch43lzm
                      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                      05-12-2025, 08:37 PM
                    • cheeky2
                      Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                      by cheeky2
                      I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                      Obviously the same LVDS connector for the screen connection...
                      05-25-2024, 03:27 AM
                    • advant
                      Driving a Sharp TCON/panel with a universal main board
                      by advant
                      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                      02-03-2020, 12:25 AM
                    • Loading...
                    • No more items.
                    Working...