Issue: Vizio VX42LHDTV10A turns on, no raster, backlight turns on.
Solution: Replace IC U33 on Main Board (Digikey AP1117E33GDICT-ND).
Solution: Replace IC U33 on Main Board (Digikey AP1117E33GDICT-ND).
-
-
Re: (SOLVED) - Vizio VX42LHDTV10A - Turns on, No Raster (Video), Backlight OK
Same fix for Vizio GV52L FHDTV10A, main board 3652-0012-00395. TV turns on, Vizio label changes from orange to white and backlight turns on, but no picture and doesn't respond to remote or the side buttons. Only way to turn it off is to unplug it.
Measure U33 regulator output (large tab) to ground, should be 3.3V. If not replace with LD1117ASTR (Digikey 497-1229-1-ND). Original part is AMC1117. Be sure to get the adjustable version.
-
vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.
panel: au optronics T650HVN05.4
72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1
Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
https://www.shopjimmy.com/vizio-56-0...-power-supply/
Vizio 55.75J01.001G (91.75J10.004G) Main Board... -
Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Issue: LG 60LA8600-UC Turns On, Turns Off 2 Seconds Later. No Video.
Solution: Main Board EBT62529302 had L7201 & Q2302 visibly blown. Tried to replace these 2 parts from a similar LG board, TV would turn on and show no video. Replacement unavailable and who knows if the panel is damaged. TV will be recycled.
LG stands for Likely Garbage.07-25-2022, 05:45 AM -
Vizio M60-C3 powers on, perfect logo, turns off. If you don't touch anything it will repeat this process by itself until it is unplugged. Not the "button board" since I disconnected the cables to the main board and the problem persisted. So I'm fairly positive something is going on with the main board, but want to know if there is a fix for this other than replacing the expensive mainboard, which may eventually have the same problem. Also, heat sink was hot as hell when this all started. Unplugged for a few days and same thing happens.
My kids are getting antsy waiting...
Comment