LG Z-SUS board (with FPGF4633) - Service kit parts value

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dj831
    New Member
    • Jun 2015
    • 5
    • France

    #1

    LG Z-SUS board (with FPGF4633) - Service kit parts value

    Hi everyone, I've got a question for those who have already repaired these Z-SUS boards, having 6x FGPF4633 shorted, an open 6.3A fuse and some blown 27R resistors. I've got the one of a friend to repair (60").

    Since two of resistors driving the gate of a mosfet have increased values (c.a. 30R), I'd like to replace these IGBT drivers, in SOT23-5 case. These are labeled IC215 and IC216. They are engraved '5K', but goggling that gives absolutely nothing.

    Hence the question: who knows the value of these IGBT drivers?

    Sure, kits are available on eBay for cheap, but I do not trust at all semiconductors purchased on eBay (so many fakes ...). I plan to purchase parts from usual distributors (Mouser).

    Thanks!
    Last edited by dj831; 06-20-2016, 04:33 AM.
  • dj831
    New Member
    • Jun 2015
    • 5
    • France

    #2
    Re: LG Z-SUS board (with FPGF4633) - Service kit parts value

    Up

    Comment

    • dj831
      New Member
      • Jun 2015
      • 5
      • France

      #3
      Re: LG Z-SUS board (with FPGF4633) - Service kit parts value

      Anybody? Thanks in advance !

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: LG Z-SUS board (with FPGF4633) - Service kit parts value

        Checked the schematic ?
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • supers
          New Member
          • Jul 2017
          • 3
          • Canada

          #5
          Re: LG Z-SUS board (with FPGF4633) - Service kit parts value

          Someone figured it out...check this post.

          https://www.badcaps.net/forum/showth...light=fgpf4633

          Comment

          • tw2005
            Badcaps Legend
            • Oct 2011
            • 6458
            • Australia

            #6
            Re: LG Z-SUS board (with FPGF4633) - Service kit parts value

            Originally posted by supers
            Someone figured it out...check this post.

            https://www.badcaps.net/forum/showth...light=fgpf4633
            yeah but it's a year old post. Anyway, Whoever reads this wondering will be grateful I'm sure

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • Hakuu
              LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
              by Hakuu
              Hi There,

              This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

              After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

              More Details

              TV Model - LG OLED77G1PUA

              Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
              07-12-2023, 02:37 PM
            • Loading...
            • No more items.
            Working...