Telefunken TLCD40FHDC Bottom half pic faulty

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Grunder
    Badcaps Veteran
    • Jan 2016
    • 323
    • south africa
    #1

    Telefunken TLCD40FHDC Bottom half pic faulty

    Hi Guys,

    Thanks for info in "sony tcon training manual". According to the examples they have, i guess a faulty gate tab bond failure is causing the bounce/ double image in the picture, and gate driver failure causing the failure in the bottom half of the picture. guessing the panel is done, and the set is out. Thanks Budm for the link.

    edit: had originally tried other second hand tcon which produced same result, and wasnt sure if had two tcons with same fault, so scouting through other posts found the link. Thanks again. Mike.
    Attached Files
    Last edited by Grunder; 05-18-2016, 05:02 AM. Reason: missing info
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • howardc64
      TCL 49S405 double image
      by howardc64
      LCD displays a 2nd image slighty offset vertically. And multiple pairs of black lines along the bottom. Probably common as google "TCL 49S405 double image" pulls up this ifixit post ( link ) with identical ( nearly, but their fault seems to be on the other half of the panel than mine ) problem without solution.

      This one looks to be a more difficult to diagnose because most? of TCON seems integrated ( CSOT BGA on buffer baord) into the left panel edge board ( looking from rear of TV) There are 2 buffer boards for each 1/2 of the screen. Main connects to the left buffer board...
      06-23-2025, 03:20 PM
    • kca
      LG 82UN8570AUD ~ TCON or PANEL?
      by kca
      Hello all ~

      Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

      When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

      I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
      08-31-2025, 06:38 AM
    • Formaster
      Sony KD75XE9005 Bottom half double image
      by Formaster
      Hi guys,

      I'm tyred from these sympthom, if anyone helps me really big thx.

      When i open the connection and play with these ribbon cables, i can get back the image problem free. BUT after turn off and ON, the bottom half is ghosted/doubled again. Did'nt from touch, only reboot the TV. I have changed the ribbons from the other side, but the same. Anyone any idea please?...
      08-10-2021, 06:57 AM
    • Raulnn
      TD Systems K50DLG12US half black and half white screen
      by Raulnn
      good night! I have this screen that looks half black and half white. the tcon gives a low vgh value (5-6v). the rest seem fine. I first removed the flex from one half of the panel and then the other. Removing the left, vgh increases it to 25-26v. I think the problem is in that area, but there are not many elements on the integrated controller board. there are no shorted capacitors. could they be a cof? Some help?

      By the way, now the entire screen is black. Maybe some flex was not connected correctly... I have exchanged the flex and there are no variations, I don't think they are the...
      01-20-2024, 04:49 PM
    • cagri
      BOE HV650QUB-F70 TCON issue - VGH AVDD HAVDD no voltage - caps seem ok
      by cagri
      I have an Arcelik TV with BOE HV650QUB-F70 TCON board, but I think there's an issue with/around PMIC.
      PMIC: iML8940

      There is backlight and sound, but no picture. I watched a YouTube video and turned it off, half an hour later it was dead.

      Input 12v, fuse ok
      DVDD1V2 = 1.2v
      DVDD1V8 = 1.8v
      DVDD3V3 = 3.3v
      VGL = -7v
      **VGH = -0.3v
      **VCOM0, AVDD, HAVDD = 0v
      SWBK1 = 3.3v
      SW1 = 12v

      VGH to GND resistance is 500kohm as expected

      Readings are same after I disconnected the two cables from TCON to panel...
      07-27-2023, 09:48 PM
    • Loading...
    • No more items.
    Working...