What to do with a 60" LG... (60PG3000)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alastair E
    Chief Womble
    • Mar 2013
    • 1963
    • U.K.

    #1

    What to do with a 60" LG... (60PG3000)

    Couple of days ago, a 60" LG set came into work. It was put by side of the scrap TV skip as the skip was full.

    It just so happens, --That day is my day off.

    Next morning they changed the skip--but didn't move the 60 resting against it.
    --The obvious happens--it gets smashed.

    But--Only the outer glass and front cabinet suffered, Panel is OK--at least unbroken. One of the guys working on the site was told by feller who brought it in that its been checked by so-called, 'tv-engineer' and is completely buggered.

    For a larf, I trundled it down to the workshop on my trolley and checked it out. It has a Y-SUS short,--the SUS_Up and SUS_Dn trios of IGBTs are short.

    It'll cost maybe £20 in IGBT's or a fiver for a complete Y-SUS from fleagay.

    Gotta try it out--but have no idea just What to do with it after. Cabinet is wrecked and so is the front glass, so cant sell it if it does work with new board...
    Another thing against it--Only 720p
    TELEFIX

    How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
    http://www.irf.com/technical-info/appnotes/an-1088.pdf
    PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #2
    Re: What to do with a 60" LG... (60PG3000)

    Hope it goes well, btw the panels in these are junk so dont expect it to be working with out lines on it lol
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • comptek
      Badcaps Veteran
      • Aug 2013
      • 606
      • uk

      #3
      Re: What to do with a 60" LG... (60PG3000)

      Originally posted by ReeceyBurger123
      Hope it goes well, btw the panels in these are junk so dont expect it to be working with out lines on it lol
      i got the 50" version fixed it and got a line smack bang in the middle

      Comment

      • comptek
        Badcaps Veteran
        • Aug 2013
        • 606
        • uk

        #4
        Re: What to do with a 60" LG... (60PG3000)

        hmmm heated the lower buffer flex to screen its now gone.............. for now

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain

          #5
          Re: What to do with a 60" LG... (60PG3000)

          Hmm probably the Cof Ic has a bad connection would say tab bond fix it but the Ic will over heat lol. Also yours was a PS3000 which is FHD ?
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

          Comment

          • comptek
            Badcaps Veteran
            • Aug 2013
            • 606
            • uk

            #6
            Re: What to do with a 60" LG... (60PG3000)

            Originally posted by ReeceyBurger123
            Hmm probably the Cof Ic has a bad connection would say tab bond fix it but the Ic will over heat lol. Also yours was a PS3000 which is FHD ?
            youre right reece 1080
            it was done on the edge of the screen its been on for whilw aint come back but im sure it will

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain

              #7
              Re: What to do with a 60" LG... (60PG3000)

              Lol maybe try, taking the panel down and putting some thermal pads to push against thw Ic ? Like a tabbond repair but thermally
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

              Comment

              • Diah
                Badcaps Legend
                • Feb 2013
                • 6343
                • Germany

                #8
                Re: What to do with a 60" LG... (60PG3000)

                Originally posted by ReeceyBurger123
                Lol maybe try, taking the panel down and putting some thermal pads to push against thw Ic ? Like a tabbond repair but thermally
                i used always ACF Anisotropic conductive film .. easy to replace any flex on LCD within 1 hours at most.. i think you need to try it.

                Comment

                • ReeceyBurger123
                  Never Give Up !
                  • May 2014
                  • 7325
                  • Britain

                  #9
                  Re: What to do with a 60" LG... (60PG3000)

                  Originally posted by Diah
                  i used always ACF Anisotropic conductive film .. easy to replace any flex on LCD within 1 hours at most.. i think you need to try it.
                  Cheers Diah, might give it a shot and order some
                  Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                  https://www.facebook.com/Telford-Tel...7894576335359/

                  Comment

                  • Diah
                    Badcaps Legend
                    • Feb 2013
                    • 6343
                    • Germany

                    #10
                    Re: What to do with a 60" LG... (60PG3000)

                    however 150m long are round 150 USD but they worth allot, just keep the roll at Temperature -5 to -10 degree

                    Comment

                    • comptek
                      Badcaps Veteran
                      • Aug 2013
                      • 606
                      • uk

                      #11
                      Re: What to do with a 60" LG... (60PG3000)

                      Originally posted by ReeceyBurger123
                      Lol maybe try, taking the panel down and putting some thermal pads to push against thw Ic ? Like a tabbond repair but thermally
                      i have just put it together lolol, its not the chip side though i heated up the glass side the chip has transfer tape to the chasis and then the long metel plate that runs along the bottom

                      Comment

                      Related Topics

                      Collapse

                      • Salvatore057
                        plasma TV Lg 42w451 - why is the zsus igbts damaged when the ysus is plugged?
                        by Salvatore057
                        Hi all,
                        I am trying to fix my plasma TV which is not powering on due to damaged IGBTs. I have changed two igbts and 2 IC drivers on the zsus and also two igbts on the ysus.
                        Now everytime I plugged the ZSUS and the YSUS boards to the power board, the two 30f124 IGBT on the ZSUS are damaged and the TV stays in standby mode. When I plug the ZSUS board alone the TV turns ON but I do not see pictures. When I plug the ZSUS board without the two 30f124 IGBTs and the YSUS board, the TV powers on with a picture.
                        I am lost, should I change the YSUS board? Is the YSUS board damaging...
                        04-29-2018, 01:29 PM
                      • legg
                        LG 42PC3 buffer output doesn't follow YSUS
                        by legg
                        LG42PC3D -UD originally with green lamp but no display or audio.
                        Owner says was working, then went 'pop'.
                        All 5V caps bulging. replaced.
                        All PSU output voltages within spec but -Vy is low on YSUS.
                        One of three parallel fets between SUS_OUT and SUS_DN is zenering,
                        eventually shorts DG. Replaced all 3 - -Vy now OK.

                        Y scan buffer test point does not follow YSUS output below -50V

                        Note: This unit seems to expect YSUS output to park at -Vy in between
                        drive signal pattern periods. A replacement drive signal board confirms this....
                        11-18-2021, 11:49 AM
                      • Truncatedhose
                        Help repair this relic? Philips 42PF7220A/37, pulsing buzz from YSUS
                        by Truncatedhose
                        Greetings all!

                        Originally this set had the usual messed up video symptoms such as: horizontal lines, weak, grainy video, bottom and top of picture differ in intensity of problem. It also seemed to slow to turn on or show the messed up picture.

                        Seemed like must be YScan/buffer board failure. Ordered buffer boards from my distributor which were supposed to be original/new and also from another distributor, I ordered the YSUS because I wanted to replace it for preventative maintenance. (also, the YSUS had a bulged cap, so there was even more reason to suspect it could...
                        07-04-2018, 10:59 AM
                      • zwarder
                        eax61319402 50PJ350 YSUS
                        by zwarder
                        Hi
                        Had shorted YSUS

                        Q24 RPJ63F3
                        C726 cap
                        Q11 K3667
                        R528 & R529 2.2 ohm

                        replaced all of these but still trips psu VS & VA are a bit low when ysus disconnected. IC301 does look a bit burnt however

                        ZSUS is also good as far as I can tell

                        Anyone could help me out on this one
                        10-23-2023, 08:11 AM
                      • rivetcity
                        Panasonic TX-P42UT30E, IGBTs on the SN board
                        by rivetcity
                        Hi,

                        I'm having problems with my plasma Panasonic p42txu32e. The issue started about 12 months ago.

                        I have a remote controlled main outlet so whenever I turn off the TV set at night, I also switch off the whole power outlet.
                        It gives me a better feeling to know I don't have 230V on any cables, so my dog can't get hurt if he gets the idea to start chewing on something.

                        About 12 months ago the TV started to have the following problem: when pressing anything on the RC to get it on, the red led would go off.

                        Sometimes it would turn...
                        08-12-2021, 01:25 AM
                      • Loading...
                      • No more items.
                      Working...