DLP Mitsubishi WD-65837 Will flash the screen on for a second, then blinking red

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PibblesOnAcid
    Member
    • May 2016
    • 12
    • US

    #1

    DLP Mitsubishi WD-65837 Will flash the screen on for a second, then blinking red

    I have a Mitsubishi WD-65837 DLP HDTV.
    When you turn it on, it flashes a green light (normal, warming the fans and lamps up) When the screen flashes on blue with logo, it turns off after a second with a flashing green light. I have uploaded a video to Youtube to demonstrate.

    https://www.youtube.com/watch?v=AfBiDeHirxI



    I had this problem once before about 4 years ago, The light would flash green while it warmed up and when you usually heard the *click* of the lamps coming on, there was no *click* or screen lightup, just directly to red flashing light.

    I installed a Mitsubishi 934C329001 Power Supply https://www.shopjimmy.com/mitsubishi...wer-supply.htm

    That fixed it for about a yer and a half until it did it again, (but the screen flashing) I ordered and replaced the power board but that didn't fix anything,

    I put the TV up for a couple years and now it's time to fix it..

    Does anyone have any observations or ideas on what it could be? apparantly it isn't the power board :p

    Thanks!
    PibblesOnAcid
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8195
    • Canada

    #2
    Re: DLP Mitsubishi WD-65837 Will flash the screen on for a second, then blinking red

    I just watched your video. Seems like your DLP is trying to turn on, fires up the lamps and shuts back down. If your PSU is good, I would be looking hard at that lamp ballast.
    Last edited by CapLeaker; 05-06-2016, 05:03 AM.

    Comment

    • PibblesOnAcid
      Member
      • May 2016
      • 12
      • US

      #3
      Re: DLP Mitsubishi WD-65837 Will flash the screen on for a second, then blinking red

      Originally posted by CapLeaker
      I just watched your video. Seems like your DLP is trying to turn on, fires up the lamps and shuts back down. If your PSU is good, I would be looking hard at that lamp ballast.

      I'll give it a shot, It was stored in a dusty home and got a lot of dust in it

      Comment

      Related Topics

      Collapse

      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • Sam Scarbo
        Brother DCP-L2540DW scanner/printer - only showing blinking screen in LCD.
        by Sam Scarbo
        I got this broken printer from my brother who got it from the street. He asked me to help to fix it.

        I need help on fixing this machine.

        Issues/Observations:

        1) When connected to power, it's not working. Only showing blinking screen on the LCD. See pics 1 and 2. It is blinking every 2 seconds.

        2) I pressed the buttons on the control panel to see if there is any response. The "Options" button can turn off the LCD screen, and then press hold the power button for about 1 second can turn the blinking screen back on again. Other than...
        10-19-2023, 10:32 PM
      • reformatt
        Macbook Air M2 A2681 Kernel panics after screen replacement
        by reformatt
        Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

        It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
        07-31-2025, 08:37 PM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • Audeze
        Sony XBR-75X950G seems dead with a black screen but backlight and sound is working and no blinking red lights
        by Audeze
        I have a 2019 75" x950g, and while playing a movie, the screen suddenly went dark in a weird way, where it faded towards one corner into being fully black. Now the TV turns on, and the backlight comes on, but there is nothing displayed except black. Sound still comes through the TV speakers, and i have tried doing a hard reset using the volume - and power buttons while plugging the display back in, but it did not fix it. I can confirm that pressing buttons on my remote is still doing "something" because I'm hearing sound still, even though the screen is black.

        Does...
        10-06-2024, 08:54 PM
      • Loading...
      • No more items.
      Working...