Panasonic TC-P50G20 Random Static

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mfucilli
    Member
    • Mar 2016
    • 10
    • USA
    #1

    Panasonic TC-P50G20 Random Static

    Recently replaced my panels TXN/A1MGUUS (TNPH0834AE) A Board, as it was causing a 10 blink error and wouldn't power on. Replacement had the unit working fine for a few weeks now.

    Within the past two days I've been noticing quick blips of static showing up on the screen. Happens very quickly and only noticed it three times so far. I have a Denon receiver hooked up to HDMI 1, and using a PS4, DVD, and Chromecast (all plugged into 3 inputs on the reciever). These flashes happened twice on the PS4 and once on the Chromecast. I haven't used the DVD in a while.

    I'm thinking perhaps a bad HDMI cable, or is the new A Board faulty?
    Tags: None
    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia
      #2
      Re: Panasonic TC-P50G20 Random Static

      Maybe try recording the screen to capture this and post a still image if you can.

      Is it like digital noise, like blocks?

      or look anything like this?



      These boards can have issues as they age or with heat end up with bad solders under the BGA chips I suspect.

      I've had one generate random lines as pictured fickering and as the board heated got worse.

      So it may be a sign of trouble, would need to see what it is if possible.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Dannyx
          Panasonic PBX shuts off at random
          by Dannyx
          Good day folks. I wasn't too sure whether I should start this discussion just yet, because I feel I haven't dug deep enough, which I can't do until Monday at work, but I eventually thought I'd just go for it so by the time people start joining in, I'll hopefully be able to complete my measurements.

          TL;DR - Panasonic KX-NS500 PBX sometimes dies - PSU issue (schematic attached). 41v rail drops to 25v and 15v rail goes off entirely. Often, even a power cycle doesn't restore it - main cap (C4) needs to be "manually" discharged for it go gain.

          Details: to keep...
          03-12-2022, 05:03 PM
        • Andre Gilbert
          Panasonic TC-P55ST50 8 blinks then no blinks
          by Andre Gilbert
          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

          TV Model: Panasonic TC-P55ST50
          ...
          1 Photo
          11-20-2024, 08:52 PM
        • Leebo249
          SA-HD52 1 Default Crosstalk/static after replacing selector switch IC?
          by Leebo249
          Hey,

          A month back I replaced the selector switch IC on my Panasonic SA-HD52 as the radio was still playing when I selected the CD, it did this with the tape and record too.

          Now when I replaced the IC it worked perfectly, no cross talking and I left it at that for a month and have come to it today to play a CD (you can hear it spinning) and the issue has come back although with another issue.

          Both issues are random, the original problem where the radio will play over other playbacks has come back and another time you turn it on it will refuse to play anything,...
          09-07-2025, 07:23 AM
        • AquaMan Ua
          Problem with PANASONIC CF53 laptop after changing BIOS settings
          by AquaMan Ua
          Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
          2
          2 Photos
          05-17-2025, 09:40 AM
        • EvazX
          ASUS ROG G513QY – RX 6800M powered but not detected intermittently + random crashes (Motherboard: 6050A3254002-MB-Axx)
          by EvazX
          Hello everyone,

          I am working on an ASUS ROG G513QY laptop with RX 6800M dGPU.
          Originally, this laptop was completely non-functional. I replaced the motherboard (part number 6050A3254002-MB-Axx), and with the replacement board it started working fine.

          For a long time, the dGPU worked perfectly stable. I played several hundred hours on very demanding games such as Cyberpunk 2077 without any crashes, instability, or detection issues. Performance was excellent and there were no warning signs of failure.

          However, after some time, the replacement motherboard...
          08-25-2025, 06:09 PM
        • Loading...
        • No more items.
        Working...