visio VP423 HDTV/10A

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rmasters3
    Senior Member
    • Mar 2010
    • 126
    #1

    visio VP423 HDTV/10A

    Visio turned on initially and ran for several hours, then left overnight (Off) and wouldn't restart the next day or since.

    Quick look didn't show any bulged caps.

    Suggestions??
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • knoxrebel
      Bad panel or bad mainboard? Visio E601i-A3
      by knoxrebel
      Visio E601i-A3
      Tv powers on and input is able to be selected/used, but the on screen menu closes as soon as it is opened and the there are some periodic "glitches" of the on screen menus in relation to position and size. I have tried all the system resets,but because the menus are not usable, i was unsuccessful. Does this seem like a panel issue? Odd that it only affects the menus and not the main input picture. I have already tried disconnecting front panel buttons assuming one was stuck down causing the input to continually be scanned or similar.
      https://www.youtube.co...
      03-01-2025, 12:14 PM
    • thstuff
      Sony OLED XR-77A80J - Initially dead, now 4 Flashes
      by thstuff
      A) TV initially dead
      B) On a hunch of a locked up Google OS, plugged in a USB memory stick with latest FW and plugged it in. It booted into the update screen, completed the update and restarted to Home screen.
      C) Was able to perform a Reset from Settings menu and completed out of box configuration.
      D) Ran a 4K screen saver demo for about 6 hours, then turned it off for the day. Did not notice any stripes, dead zones or other artifacts in the image.
      E) Powered back on and it now runs for a few minutes before relay clicks, screen goes blank, Main Board Red Digital Optical...
      12-26-2024, 09:10 PM
    • ipmungam
      A1708 820-00875 won't power on; 20V 500mA initially, then 0A.
      by ipmungam
      Our 2016 13" mbp has had some issues since liquid got into one of the USB-C ports a few years ago, but it was working well with the latest (aftermarket) battery for several weeks -- until now.

      With the board out and no battery, it negotiates 20V properly and starts to take 300-600mA (let's call this phase 1). With the screen attached it will even show the red low battery icon. Then after 5-10s the current drops to near zero and nothing more happens (phase 2). Power button has no effect.

      I have checked all the coils I can see while unpowered and none seem shorted...
      08-23-2025, 09:04 AM
    • mariorocco
      tv combo trevi ltv 2122 hdtv spento
      by mariorocco
      Main : T.EME380.61
      Pannello:CX215LEDM​

      Cerco Dump flash
      02-10-2025, 06:17 AM
    • KYBOSH
      Trying to Save - LG 60PH6700 60-inch plasma HDTV - Powers ON but no picture
      by KYBOSH
      Saved this beast from the landfill this weekend.
      Manfactured July 2013 in Mexico.

      I love working on plasma TVs.
      Its been a while but I was lucky enough to find 2 this week.

      The TV powers on and stays on but no picture. Havent checked for sound yet.
      No bulging caps although the insides are pretty dusty and the boards are discolored from many years of high heat.
      Will start troubleshooting tonight.

      ...
      10-17-2024, 01:17 PM
    • Loading...
    • No more items.
    Working...