Here is the attached file for the 40D1333b Firmware,which may be useful to many folks out there!
-
Last edited by steviewonder; 04-02-2016, 04:27 PM. -
Re: Toshiba 40D1333b firmware download.
Thanks buddy will help alot of people out, and me for when the ones I have sold fail lol
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/ -
Re: Toshiba 40D1333b firmware download.
Just to confirm this is deffo the 1333b and not the 1333DB ?Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
HI all, Does anyone know if there exists an archive for older firmwares for Toshiba TV's? I've searched all over Toshiba's various websites and also on Dynabook's site (they say they deleted all old firmwares due to "server space". ) Toshiba has not replied to my request.
I'm looking for Firmware 1.07 for the 19/22/26/32 C100U series as described in this link:
https://support.dynabook.com/support...tentId=2865076
Thanks!
06-16-2025, 11:56 AM -
Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...06-17-2025, 07:17 AM
-
I have this Toshiba 49U7763DB Tv which was suffering issues after various electrical power cuts, which happened in quick succession
Originally the TV was powering on and then very shortly powering off. I managed to get into the menu structure before powering off and carry out a first time installation of the TV. Which didn't make much difference. I have managed to factory reset (that didn't make any difference either).
The firmware inside the 17MB120 is corrupted and is causing some strange issues so my question is does anyone have any suitable firmware for this model?
Details:... -
hi everyone, thanks in advance, any help is welcome.
1. tv only show logo and "blue" screen. backligth on.
2. do a vestel firmware update and works but no remote control. working using app in mobile phone with ir. could find the thosiba one.
3. do a toshiba firmware update for this model but get error at 24%
4. have the brilliant idea of mixing the boot.bin from vestel in toshiba firmware to be sure about how stupid i can be. i can surprise sometimes.
5. tv gets the update with no errors. then never again showed backlight anymore. led still... -
Hi,
I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...08-11-2025, 02:14 PM
Comment