Re: Lg 42 led picture upside down
no need to service remot menu, AZ_Adjust _ IN_StOP IN_Start can be done form any mobile phone ahd IR sender, like galaxsy S5, or from PC with DIY playing wmv files via winamp.
yes its mirro on now, just turn it off
-
Re: Lg 42 led picture upside down
That's always a problem when you need to get into the service menu
Good luckLeave a comment:
-
Re: Lg 42 led picture upside down
Hi no seems i need a service remoteLeave a comment:
-
Re: Lg 42 led picture upside down
Did you sort out your problem?Leave a comment:
-
Re: Lg 42 led picture upside down
There's a Youtube video
https://www.youtube.com/watch?v=reUEi6laRnALeave a comment:
-
Re: Lg 42 led picture upside down
Taken from another website:
"This is most likely a setting that can only be altered using the TVs service menu. On LG flat screens such an option is named "Mirror" (within a sub menu of the service menu) which can be toggled on or off."Leave a comment:
-
Re: Lg 42 led picture upside down
You don't say what model LG you have or what board number you used to replace it so it's difficult to give you an answer at present.
You can try:
http://www.askvg.com/secret-service-...ony-and-lg-tv/Last edited by dick_barton; 03-30-2016, 11:55 AM.Leave a comment:
-
-
Lg 42 led picture upside down
Hi guys just got a new board for my tv exactly the same board but the pic is upside down any way to fix thisAttached Files -
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..
Is there anything I can do to flip the picture or do I need to change the board again..
Thanks
Garry... -
Hi all!
I've recently run into an issue with my Samsung UN55H8000AF LED TV displaying no image. I've done quite a bit of research in terms of what could be wrong with it. Below are the steps I've taken prior to reaching out here for some assistance:
1. I've tried replacing the T-Con board (BN95-01594A), twice and have still experienced the same issue with all the boards I've tested with.
2. I've tried to remove one side of the ribbon cable that goes from the T-Con board to the panel and still not getting any image on left or right side.
3. I've checked voltages... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"...
Leave a comment: