LG 42LC2D Interesting Capacitor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zacheriaj
    Senior Member
    • Jan 2014
    • 138
    • United States

    #1

    LG 42LC2D Interesting Capacitor

    Obvioiusly the samxon caps are bad, but look at the larger 2200uF cap on the far right. I've never seen a cap do this where the sleeve drops from the can. Has anyone else seen this? The cap itsself tests ok so i'm thinking probably just from heat or a faulty sleeve.
    Attached Files
    You Can't Succeed Until You're Willing to Fail
  • tech2014
    Badcaps Veteran
    • Aug 2014
    • 807
    • Canada

    #2
    Re: LG 42LC2D Interesting Capacitor

    thats different lol. I take it this is out of a Samsung.

    Comment

    • zacheriaj
      Senior Member
      • Jan 2014
      • 138
      • United States

      #3
      Re: LG 42LC2D Interesting Capacitor

      Originally posted by tech2014
      thats different lol. I take it this is out of a Samsung.
      It's an old 2006 model LG 42"lcd. Nabbed it for $20. I don't miss the weight of the older LCD tvs. 85 lbs!
      You Can't Succeed Until You're Willing to Fail

      Comment

      • tech2014
        Badcaps Veteran
        • Aug 2014
        • 807
        • Canada

        #4
        Re: LG 42LC2D Interesting Capacitor

        cool, never seen domed caps on an LG. Yeah I hate the old ones too, very heavy.

        Comment

        • stj
          Great Sage 齊天大聖
          • Dec 2009
          • 31028
          • Albion

          #5
          Re: LG 42LC2D Interesting Capacitor

          the short sleeve means it's totally cooked!!!
          the sleeves on caps are made from thin heatshrink sleeving.

          Comment

          • zacheriaj
            Senior Member
            • Jan 2014
            • 138
            • United States

            #6
            Re: LG 42LC2D Interesting Capacitor

            Originally posted by tech2014
            cool, never seen domed caps on an LG. Yeah I hate the old ones too, very heavy.
            have you ever seen it where the casing of a cap shrivels down like that? Even though the cap is fine? haha
            You Can't Succeed Until You're Willing to Fail

            Comment

            • steviewonder
              Senior Member
              • Dec 2013
              • 183
              • england

              #7
              Re: LG 42LC2D Interesting Capacitor

              This was very common back in the 1970's and 80s,particularly the black nichicons.Some may remember hitachi TV's with this issue-think the plastic sleeve was not as heat resistant as the cap itself!

              Comment

              Related Topics

              Collapse

              • Prolog
                RTX 3080 FE Identifying capacitor
                by Prolog
                Hi people, I hope this is the correct spot to post this, I'm new to the forum.

                I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

                I hope these photos make it clear which component I am referring to:
                (yes, the soldering is a bit botched from removing the blown one, I know)

                I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
                12-01-2024, 08:27 PM
              • chth96
                If I replace with inferior capacitor, Is it No harm to other IC components at all?
                by chth96
                I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
                Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
                It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
                So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
                I know that these capacitor will not last as long as nichicon capacitor...
                12-22-2023, 04:34 AM
              • chth96
                How can I test non-polarized capacitor?
                by chth96
                I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
                I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

                And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
                I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
                06-02-2024, 07:31 PM
              • chth96
                Is it no harm to replace with capacitor without ripple current rating?
                by chth96
                When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


                Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
                But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
                Rubycon YK DataSheet (b...
                04-19-2024, 05:19 AM
              • chth96
                Should I replace polymer capacitor?
                by chth96
                a few days ago I finally purchased mser-100 v2 and I tested its abillity of measuring ESR value.
                I found that It shows pretty accurate ESR value for electrolytic capacitor,But When I measure polymer capacitor of dreamcast game console,I found that one third of polymer capacitor's ESR value is more than twice the value of ESR meter table.(for example, I measured one polymer capacitor of 6.3v 100uf, It showed ESR value of 7.68)
                Although my dreamcast now turns 20 years old but it still works. I occasionally have played game with it.
                Is this ESR value of polymer capacitor correct?...
                11-18-2022, 04:22 AM
              • Loading...
              • No more items.
              Working...