Samsung UN32EH4000 with colour problem.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SEAWOLF
    Senior Member
    • Nov 2011
    • 177
    • Barbados West Indies.
    #1

    Samsung UN32EH4000 with colour problem.

    I recently received a Samsung UN32EH4000 with a colour and double image problem.When the television is first switched on the colours and images are ok
    then suddenly the colours change and the picture becomes black and white and
    double images are also displayed .There are also lines at the top of the screen.
    Can anyone supply a solution for this problem?
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2149
      • uk
      #2
      Re: Samsung UN32EH4000 with colour problem.

      Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem

        Comment

        • mmartell
          Badcaps Legend
          • Oct 2013
          • 3189
          • Canada
          #3
          Re: Samsung UN32EH4000 with colour problem.

          I'd say your panel is toast, but yes pictures of the fault would help.

            Comment

            • SEAWOLF
              Senior Member
              • Nov 2011
              • 177
              • Barbados West Indies.
              #4
              Re: Samsung UN32EH4000 with colour problem.

              Originally posted by sordids999
              Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem
              Here are the pictures of the boards in the Samsung UN32EH4000.
              Attached Files

                Comment

                • carlamendes
                  New Member
                  • Jul 2016
                  • 1
                  • brazil
                  #5
                  Re: Samsung UN32EH4000 with colour problem.

                  Friend. I'm electronic engineer in brasil and I'm facing the same issue. Did you fix it? Could you reply me at carlamendesgatinha@gmail.com.

                  Regards.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • porfyriadhs
                      Samsung UE32EH4000W Colour problem
                      by porfyriadhs
                      Hello dear friends. I have problem with a Samsung UE32EH4000W. The tv starts with good Colour quality and after a while the colour changes. Anyone can help me please
                      06-25-2024, 01:21 AM
                    • howardc64
                      Samsung UN55JU650DF network/streaming problem
                      by howardc64
                      Fixed a 9 year old UN55JU650 by replacing backlight. Original backlight LED was still working after 27k! hours but terrible picture of course. Few LEDs were out, 5-6 lens fell off (bright white spots) and another few popped off with slightest force. Surviving LEDs were all slightly blue so picture has a blue tint.

                      This TV runs older Tizen OS (updated to latest version, see pic) and have problems with network (wifi or ethernet) connection. The Tizen UI frequently switch to coax input source while changing content sources. . If no good signal (coax not connected, no prior antenna/cable...
                      07-09-2025, 12:44 PM
                    • Dave03
                      Samsung qe50q60Tau t con problem
                      by Dave03
                      Hi everyone so sorry my bad english Im hungarian
                      so I have a few samsung qe50q60tau and I trying to repair t con problem, I have a 100% working main board 100% working psu for the tv for another tv I replace them boards for the wrong tv and the problem was same so the problem not the main board and not the psu, the back light is working
                      I turn on the tv the qled logo is blinking turn on and off the tv I tried to tape the t con cable and I found the right pin for the tv is stable turned on but no picture, no qled picture only back light and not arrive the currrent for the t con board...
                      02-06-2024, 03:05 AM
                    • THXFX
                      samsung un43nu7100 BN94-13191C/BN41-02635A boot loop problem even with tcon jumper
                      by THXFX
                      Hi I need help with a Samsung un43nu7100 BN94-13191C/BN41-02635A with boot loop problem even with tcon jumper.
                      I've already try tape method and same happen, if I disconnect both flex from mainboard to panel tv boots normal even I hear Samsung sound.
                      When I solder jumper to make t-con work with or without panel or panel cables connected it still reboot or power cycling.
                      What I noticed is that there's no voltage in VHG, HAVDD, PANEL_3.3V, AVDD_17V or 12v near dc-dc chip.
                      I check capacitors and diodes and didn't find any short IN MAINBOARD.
                      Measured all power supply...
                      03-20-2024, 03:21 AM
                    • stacysturges
                      Problem with Samsung LN52A550P3FXZA
                      by stacysturges
                      Hello,
                      I'm experiencing an issue with my Samsung LN52A550P3FXZA. Upon powering it up, I initially see a ghosting effect in the background along with some slight red pixelation in certain areas. This then shifts to green pixelation in the black areas. The picture quality fluctuates with noise for about the first thirty minutes before it eventually clears up. I suspect the T-con board might be the culprit, but I'm also concerned that there could be a problem related to my previous repair. When I turn it on, I hear a click, and the red LED light flashes three times before the screen comes on....
                      12-24-2024, 02:08 AM
                    • Loading...
                    • No more items.
                    Working...