samsung ln-t4069f power issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • whitesnake
    Member
    • Dec 2013
    • 24
    • Canada

    #1

    samsung ln-t4069f power issue

    Just got that samsung TV for free and in the process to figure out what is going on.When the tv start,the screen slowly become white like clouds,then nothing happens.After 7 to 15 attempts the screen light up and the unit work fine.

    I was aware of the capacitor issue so i replace 6 of them: 4X 10v 1000uf and 2X 25v 1000uf but it diden't solve the issue.

    Any idea what to look for?I search for hours but could not pinpoint anything.
  • Jonny g
    Member
    • Jan 2016
    • 13
    • UK

    #2
    Re: samsung ln-t4069f power issue

    Did you check all capacitors? I had this issue a few years back and I had missed one.

    Comment

    • whitesnake
      Member
      • Dec 2013
      • 24
      • Canada

      #3
      Re: samsung ln-t4069f power issue

      there where 3 that i left there,two small one and a huge one in the middle of the PS.They looked ok and i never seen these one bulged in my search

      Comment

      • Jonny g
        Member
        • Jan 2016
        • 13
        • UK

        #4
        Re: samsung ln-t4069f power issue

        Just double check all, see if any bulge at all. To me sounds like a faulty capacitor as you keep attempting to turn it on, build up a charge, then it works fine.

        Comment

        • whitesnake
          Member
          • Dec 2013
          • 24
          • Canada

          #5
          Re: samsung ln-t4069f power issue

          Can a tiny cap can cause these kind of issues?TBH i did not notice if they where buldged so i will open the case and double check.

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #6
            Re: samsung ln-t4069f power issue

            Bad caps can look normal but it have high ESR or lost its capacitance. Let the TV cool down then heat up the power supply board with hair dryer for 3~4 minutes then plug the TV and turn it on, if it is still bad then I would take the DCV readings on the power supply connector pins on the cold side, the DCV on the T-CON fuse, then if the TV starts working again then take the DCV reading to see what the difference you get.
            You should also up load good clear pictures of the whole back side of the TV so we can see all the boards.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • whitesnake
              Member
              • Dec 2013
              • 24
              • Canada

              #7
              Re: samsung ln-t4069f power issue

              ok thnks for your help tomorrow i will open the case and upload clear pictures and try to give you the readings you ask for.

              Comment

              • whitesnake
                Member
                • Dec 2013
                • 24
                • Canada

                #8
                Re: samsung ln-t4069f power issue

                ok back at home i blew some heat like mentioned but still the same symptoms.I took the best shots i could with my iphone.If you need any more info i will try to provide it asap.I will tcheck dc voltage now and send the results later.Yhanks for your help!
                Attached Files

                Comment

                Related Topics

                Collapse

                • Document Archive
                  Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-07-2024, 05:50 AM
                • vincentedel
                  Samsung SyncMaster 740n Phase Control Issue
                  by vincentedel
                  Hello,
                  I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some time—like after playing a game—the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.

                  I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
                  04-22-2025, 12:33 AM
                • Manucsl
                  QE65Q800TATXXC Samsung TV Issue
                  by Manucsl
                  Hello.

                  My TV is a QE65Q800TATXXC Samsung TV.

                  Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
                  Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
                  Any ideas to check would be very appreciated 😊

                  After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump...
                  02-19-2025, 07:47 AM
                • FourRunner
                  Display issue Samsung TV UA65JS9000W
                  by FourRunner
                  I purchased a used Samsung TV model UA65JS9000W recently knowing it had an issue with the screen. When switched on the picture was bright both sides of the screen but a little darker in the middle of the screen. Thinking this was the back lights (side mounted LCD strips) I replaced these, however the issue is still there. I am now thinking it may be a TCOM issue, but am not sure, any advice on this would be appreciated. Also whilst changing out the back lights I noticed the the thick clear plastic sheet (maybe 1.5 to 2mm thick) below the diffusers there is cracking (up to 75mm) on the sides and...
                  10-03-2024, 07:05 PM
                • ScHAmPi
                  Samsung UE48JU7000 screen issue after backlight replacement
                  by ScHAmPi
                  Hi all,

                  Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:


                  I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...
                  07-15-2024, 05:41 AM
                • Loading...
                • No more items.
                Working...