Hey guys, chirstmas night i got bad luck and some beer spill on my TV. I'm getting some tiny vertical and horizantel lines on screen. I check the LCD's driver circuit board and there was a lot green oxidation on capasitors and resistors( attached picture one). I cleaned the oxidation with thinner and I guess there is some missing parts as, R233, R234 and R224. I did some research but can not find schematic about this driver circuit board of LC320EUN (LC320EUD). So looks like resistors need to be connected, but they are missing. And i guess i'm a bit lucky there is no damage on the sticky plastic pins there. I hope i can fix this with your help. So what value resistors i might use for there? Or where can i find the schmeatic about that, and ideas i appericate lot. Thanks!
Note: First picture of damage area (Right Source of circuit board)
Second picture shows model of circuit board.
If you need any information or pictures or someting, i can make it for you! thanks!
Note: First picture of damage area (Right Source of circuit board)
Second picture shows model of circuit board.
If you need any information or pictures or someting, i can make it for you! thanks!
Comment