Samsung 40D630 blurry

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dbier63
    Senior Member
    • Aug 2015
    • 157
    • usa
    #1

    Samsung 40D630 blurry

    I have a 40" Samsung set that has a double vision picture with some thin horizontal lines. Although when the left side TCON ribbon cable is removed from the TCON board and the right side remains connected the half picture on the right side is perfect. TCON has been replaced with a new one. Can this be a main board problem or tab bond issue maybe?
    Attached Files
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8326
      • Canada
      #2
      Re: Samsung 40D630 blurry

      my bet is on the panel. Is the picture slow to respond, or does it just have double vision?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 05:50 AM
        • TR103
          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
          by TR103
          Hi, I have a Samsung UE50TU with:
          - sound and backlight, but no picture
          - when it arrived, it had a picture for a few seconds
          - it keeps rebooting
          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

          - without cable between mainboard and lcd panel and with a jumpered...
          01-22-2025, 04:12 PM
        • shelby5041
          Samsung LCD TV no picture backlight on no 12v at tcon
          by shelby5041
          hi
          i have a samsung lcd tv

          it powers on with sound and backlight but no picture

          all voltages from PS are good 12v 3.3v and 5v

          whats odd is that at the tcon i tested voltage across the fuse on the tcon and i get 0v

          i figured main board issue..so i ordered a used main board....when i put replacement main board in i still have same issue

          no 12v at the tcon fuse

          i disconnect the panel ribbon cables to rule out any panel issues and i still have no 12v at the tcon fuse

          the odds of having 2...
          10-08-2021, 08:21 AM
        • kca
          LG 82UN8570AUD ~ TCON or PANEL?
          by kca
          Hello all ~

          Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

          When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

          I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
          08-31-2025, 06:38 AM
        • brithepi2k
          Samsung UE75TU7020k No picture, Standby blinks 2 times
          by brithepi2k
          My Samsung UE75TU7020k lights up fine when one of the ribbon cables are disconnected from the main board, lights stay on but not getting half a picture, I do the same with the other ribbon and put the other one in and lights stay on but not getting half a picture. The standby light flashes 2 times then reboots then it then tries to come back on again and just keeps looping until I take either one of the ribbon tables out (doesn’t matter which one I take out it stays lit when either one is out). I’ve tested the backlights but all working with none shorting out, I’ve replaced the main board...
          2 Photos
          04-23-2025, 10:05 AM
        • Loading...
        • No more items.
        Working...