If Vizio E422VA is unplugged from electrical outlet it takes several minutes to turn on after it is plugged back in. After that it turns on fine; however, after turning the TV off it will turn itself back on after 2-3 minutes. I don't see any caps that look bad. Does this sound like a main board issue or power supply issue before recapping the PS? Thanks.
Vizio E422VA turns on by itself
Collapse
X
-
Tags: None
-
Re: Vizio E422VA turns on by itself
I had a TV like this and I thought it was the main board. It ended up being the power supply. There was a cold solder join somewhere. I just reflowed the solder on all of the parts on the heat sink, and this fixed the problem. -
Re: Vizio E422VA turns on by itself
Finally got to this. No luck on reflowing all heat sink connections. Great TV - just keeps turning itself back on after 90 - 120 seconds. Thanks.Comment
Related Topics
Collapse
-
by SS454vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.
panel: au optronics T650HVN05.4
72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1
Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
https://www.shopjimmy.com/vizio-56-0...-power-supply/
Vizio 55.75J01.001G (91.75J10.004G) Main Board... -
by ivtecHi my old Sony i turn it off and it turns itself back up and many times remote wont work have to unplug tv...
-
by mrtekHi.
picked up another TV. This time is a Vizio M65-C1. TV does not turn on. I had repaired another 60 inch vizio , Bad main board.
When power button is pressed, the Power led indicator on the bottom right, turns for a few seconds and then it fades away. No backlight or Vizio logo on screen. Removed back cover and repeated test.
This is the TV This TV is a little different from the Samsung I have worked on. Power supply is on the Left side, Main Bd is on the right side, T-CON , not in the picture is on the bottom. I am assuming that the boards in the middle are the LED... -
by sam_sam_samThis happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors
I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using
I am comparing them to a brand new one that I installed
The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well
I going to let it run for several days before I remount back on the wall next to the... -
SAMSUNG UN32J5205AF
Wierd issue. Set turns on, works as normal, then turn off, and when you try to turn back on, it wont. The backlight comes on, but doesnt boot up. You need to disconnect power supply from back, then reconnect it, and then the set works again. somewhat annoying issue.
Where to start? I can provide any videos or pictures needed to troubleshoot....... - Loading...
- No more items.
Comment