Resistor Help

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tech2014
    Badcaps Veteran
    • Aug 2014
    • 807
    • Canada
    #1

    Resistor Help

    I want a 5.6 ohm, 1/3 Watt 0603 size resistor. I need it to replace Panasonic D0GF5R6JA047 M 5.6 OHM,J, 1/3W. This part blows due to arcing on the Panasonic Plasma TV. I found a place that sells the OEM part in the US, but the fuckers want $93US to ship to Canada. Not paying that for a resistor. If anyone knows where I can find a replacement part, please share, or can I use a 1/4W resistor. I found 1/4w, just no 1/3W

    See part here:
    http://www.digikey.com/product-detai...ZCT-ND/5036348
    Last edited by tech2014; 12-10-2015, 04:25 PM.
    Tags: None
    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia
      #2
      Re: Resistor Help

      have you measured that part? what about this which is at least close to 1/3w measures 2mm x 1.25mm

      SUSUMU RP2012T-5R6-F Surface Mount Chip Resistor, Thin Film, RP Series, 5.6 ohm, 330 mW, Β± 1%, 0805 [2012 Metric]

      http://canada.newark.com/susumu/rp20...805/dp/28K1533

        Comment

        • retiredcaps
          Badcaps Legend
          • Apr 2010
          • 9271
          #3
          Re: Resistor Help

          I found this bulletin. Presumably Panasonic knows about this problem and needs a resistor that can dissipate more heat? If yes, why not just bodge in a 1/2 W through hole resistor onto those two pads and use some high temperature silicone glue to secure it in place?

          http://www.digikey.ca/product-detail...6/5.6H-ND/2240
          Attached Files
          --- begin sig file ---

          If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

          We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

          Please do not post inline and offsite as they slow down the loading of pages.

          --- end sig file ---

            Comment

            • retiredcaps
              Badcaps Legend
              • Apr 2010
              • 9271
              #4
              Re: Resistor Help

              @tech2014, it is not good form to ask the same question in more than place.

              https://www.badcaps.net/forum/showthread.php?t=50891
              --- begin sig file ---

              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

              Please do not post inline and offsite as they slow down the loading of pages.

              --- end sig file ---

                Comment

                Previous template Next

                Related Topics

                Collapse
                • jinu_j
                  Dell 2209WA - power supply - Fusible Resistor replacement
                  by jinu_j
                  Hi

                  I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.

                  1. FR950 - blown fusible resistor - 0.2 Ohm 1W
                  2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
                  3. R835 - Blown Resistor - 20KOhm SMD resistor
                  4. D930 - Shorted Schottkey Diode...
                  05-03-2025, 10:51 PM
                • mikey5791
                  Need help to replace burned resistor in 350w atx psu
                  by mikey5791
                  Hi to all forum members,

                  Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
                  The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

                  Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
                  Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
                  12-26-2024, 04:55 AM
                • MidnightRoller
                  Can a resistor lose resistance after hot air?
                  by MidnightRoller
                  I am curious if a 0402 resistor could go from 43 ohm to 0. In electronics class and my experience a resistor can degrade and gain resistance all the way up to not being able to conduct at all. I have never heard of a resistor decreasing in resistance and becoming 0 ohm or a dead short… that's not the direction they fail… or so I thought.

                  I was attempting to remove a wson8 chip on an iMac motherboard and it required a lot of heat, on one side of the chip were 3 0402 resistors that were very close. I popped the chip out unintentionally out of the tweezers and sent those resistors...
                  02-02-2022, 11:46 PM
                • artvandalai
                  What resistor ohm will work better to repair this waterpik?
                  by artvandalai
                  The resistor on this waterpik blew. I changed it with the a similar spec 47ohm 2 watt yageo resistor but it still keeps blowing the resistor. Checking with the multimeter the motor, capacitor, diodes, and thermal fuse all checked normal. Will a higher ohm resistor work better? What ohm resistor will work better to repair this waterpik? This video is showing the repair with a 56 ohm resistor https://www.youtube.com/watch?v=_J7_rV7ui1Y
                  3 Photos
                  01-05-2025, 04:10 PM
                • Andre Gilbert
                  Panasonic TC-P55ST50 8 blinks then no blinks
                  by Andre Gilbert
                  Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
                  Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

                  TV Model: Panasonic TC-P55ST50
                  ...
                  1 Photo
                  11-20-2024, 08:52 PM
                • Loading...
                • No more items.
                Working...