T-con 400HR42S4LV0A negative picture.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • eurgenca
    Member
    • Nov 2013
    • 26
    • Slovenia
    #1

    T-con 400HR42S4LV0A negative picture.

    Hello.
    I have problem with t-con 400HR42S4LV0A. Problem is negative picture so gamma correction. I can't find datasheet for 3 chips on this board, so can someone tell me which one is for gamma correction.

    LQF6041T0B-Q1
    MAX9695
    or
    SM4109

    Thank's Sebastijan.
    Tags: None
    • victor_cj
      Senior Member
      • May 2015
      • 90
      • Romania
      #2
      Re: T-con 400HR42S4LV0A negative picture.

      Definitely SM4109.
      Last edited by victor_cj; 10-04-2015, 03:11 PM.
      The art of fighting without fighting

        Comment

        • eurgenca
          Member
          • Nov 2013
          • 26
          • Slovenia
          #3
          Re: T-con 400HR42S4LV0A negative picture.

          Thank's Viktor.

          Sebastijan.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Fly_Among_Stars
              VIZIO E70-E3 Half picture with half TCON
              by Fly_Among_Stars
              Hi,
              I have a VIZIO E70-E3.
              Symptoms: Black screen, no picture, but LED backlights are working.
              I probed the power board and voltages are as listed on the board.
              Main board appears fine, too.
              I believe the problem is either a bad T-CON board, or connection to LCD, or bad LCD.
              There are two separate ribbon cables feeding the LCD.
              If both are connected, the screen is black.

              If only the ribbon cable that feeds the right side of the screen (when viewed from the front) is disconnected, the left side of the screen shows picture and...
              04-24-2023, 08:20 PM
            • shelby5041
              Samsung LCD TV no picture backlight on no 12v at tcon
              by shelby5041
              hi
              i have a samsung lcd tv

              it powers on with sound and backlight but no picture

              all voltages from PS are good 12v 3.3v and 5v

              whats odd is that at the tcon i tested voltage across the fuse on the tcon and i get 0v

              i figured main board issue..so i ordered a used main board....when i put replacement main board in i still have same issue

              no 12v at the tcon fuse

              i disconnect the panel ribbon cables to rule out any panel issues and i still have no 12v at the tcon fuse

              the odds of having 2...
              10-08-2021, 08:21 AM
            • x_orange90_x
              TCL 50S535 bad tcon or panel issue?
              by x_orange90_x
              Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
              03-29-2025, 11:02 PM
            • Tr0ll
              T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
              by Tr0ll
              Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

              The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

              Original T-con:
              Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

              First replacement T-con:

              I thought it might be t-con and ordered new t-con from china(supposedly tested)...
              10-07-2023, 07:48 PM
            • JJAAMM
              SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
              by JJAAMM
              This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

              Problem
              TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
              07-06-2023, 06:01 AM
            • Loading...
            • No more items.
            Working...