lg 50pc1d how to jumper on ctrl board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • daphney
    Senior Member
    • Feb 2014
    • 93
    • uk
    #1

    lg 50pc1d how to jumper on ctrl board

    i collected this tv other day was free so wats to lose i no some1 has been inside all caps on powerboard look new screen has a slight glow when on no pic tho i have checked fuses by ipms & all ok pulled buffers out top =15mohm bottom 1550kohm with test i seen on here then i put top1 in tried & noticed glow on screen then i seen this post
    https://www.badcaps.net/forum/showthread.php?t=16934
    & says about jumper on p1 will generate test
    what do i need to use & how?
    thnx for your help & all the great info
    Tags: None
    • Alastair E
      Chief Womble
      • Mar 2013
      • 1963
      • U.K.
      #2
      Re: lg 50pc1d how to jumper on ctrl board

      Short the two holes with jumper and disconnect LVDS cable. Power set up.

      IF alls well, test-patterns displayed. If not you'll have a SUS board or IPM/PSU problem. Suggest you check all the supplies such as Vs, Va, VSC -Vy etc are within tolerance....

      (Suspect loss of Va, from PSU or maybe failed SM fuse on lower address boards....)
      TELEFIX

      How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
      http://www.irf.com/technical-info/appnotes/an-1088.pdf
      PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

        Comment

        • daphney
          Senior Member
          • Feb 2014
          • 93
          • uk
          #3
          Re: lg 50pc1d how to jumper on ctrl board

          i pulled lvds cable out from control board noticed 2 pins bent & not pluged in tryed to straighten & snapped doh... but was a few red sparkles on screen
          bought another board & is working fine nice picture
          thanks for your help as always

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain
              #4
              Re: lg 50pc1d how to jumper on ctrl board

              Cool beans nice fix common issue on these is the 100uf 25v caps on the control board failing. Also you might want to consider recapping the Psu.
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • Hakuu
                  LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                  by Hakuu
                  Hi There,

                  This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                  After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                  More Details

                  TV Model - LG OLED77G1PUA

                  Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                  07-12-2023, 02:37 PM
                • jb_Bak
                  Sony xbr-65x900c main board issues?
                  by jb_Bak
                  Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                  Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                  Power Board Connector that goes to Main board
                  CN6401
                  Pin 01 NC
                  Pin 02 NC
                  Pin 03 "BL_ON": 0V
                  Pin 04 "N/C"
                  Pin 05 "STBY 3.3V": 3.5V
                  Pin 06 "GND": N/C
                  Pin 07 "AC_OFF"...
                  09-27-2021, 04:52 PM
                • sam_sam_sam
                  Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                  by sam_sam_sam
                  I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                  This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                  After all of...
                  07-13-2024, 08:14 PM
                • Loading...
                • No more items.
                Working...