Samsung UE40D6530WS Led TV main board repair

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • milen.m
    New Member
    • Aug 2015
    • 3
    • Bulgaria

    #1

    Samsung UE40D6530WS Led TV main board repair

    Hello all.
    I need help with a Samsung UE40D6530WS Led TV. It has no picture and sound, red indicator blinking and clicking sound is heard. There is backlight, but the screen is black (I can see it in a dark room, as the TV tries to start continuously).
    The local TV shop said it needed the main board to be replaced.
    Is there something I can do to repair it, rather than replacing it?
    Some components I can check that are more typical to fail?

    Pictures:











    Best regards,
    Milen
  • milen.m
    New Member
    • Aug 2015
    • 3
    • Bulgaria

    #2
    Re: Samsung UE40D6530WS Led TV main board repair

    I decided to replace the two electrolytic capacitors on the main board (third picture), but I am not sure what replacement to get.
    The markings are:

    22564
    100
    350

    Any help would be appreciated.

    Regards,
    Milen

    Comment

    • victor_cj
      Senior Member
      • May 2015
      • 90
      • Romania

      #3
      Re: Samsung UE40D6530WS Led TV main board repair

      You cant use as replacement for the two electrolytic capacitors 100uF 35V :
      EEEFK1V101XP, EEEFPV101XAP, UCD1V101MCL6GS , UCD1V101MNL1GS.
      Last edited by victor_cj; 08-17-2015, 03:07 AM.
      The art of fighting without fighting

      Comment

      • CapLeaker
        Leaking Member
        • Dec 2014
        • 8326
        • Canada

        #4
        Re: Samsung UE40D6530WS Led TV main board repair

        Originally posted by milen.m
        I decided to replace the two electrolytic capacitors on the main board (third picture), but I am not sure what replacement to get.
        The markings are:

        22564
        100
        350

        Any help would be appreciated.

        Regards,
        Milen
        Check with an Oscilloscope the LVDS signal. While you are at it check all the voltage regulators and then the caps for excessive ripple.

        Comment

        Related Topics

        Collapse

        • Asraf Atb
          Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
          by Asraf Atb
          Hi everyone,

          Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

          Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

          I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
          01-27-2025, 05:02 PM
        • ygorsan
          LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
          by ygorsan
          Hi everyone,




          I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







          🧩 Problem Summary:
          • The TV keeps scrolling through the menu or selecting items by itself.
          • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
          • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
          • I
          ...
          07-28-2025, 08:34 AM
        • Lee M.
          Samsung UN75RU8000FXZA bad main board?
          by Lee M.
          When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
          11-08-2023, 07:46 PM
        • JDC
          (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
          by JDC
          ONN 100012588
          Issue: No Power, Then Rebooting After Main Board Change

          Short answer: replace main board and power board
          Technical answer: replace main board and Q306 & Q307 on power board.

          Long answer:

          TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
          07-15-2022, 07:39 AM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • Loading...
        • No more items.
        Working...