Philips 42pfl5332d Half screen distortion(pic)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom.molyn
    Member
    • Mar 2015
    • 16
    • United States

    #1

    Philips 42pfl5332d Half screen distortion(pic)

    Half of the screen on this TV seems to have a green tint and flickering pixels in the affected colors. The picture is Still viewable but terrible to look at.

    I attempted a tab fix by applying pressure but the picture didn't react to pressure on any of them, reseeting the tcon ribbons made no difference either.

    There's 2 buffer boards(i think that's what they are, there non replaceable) and i have seen that I should check on some fuses, i'll be doing that next.

    If anyone has any further tips I'd greatly appreciate it.

    Thanks in advance,
    - Tom
    Attached Files
  • Agent24
    I see dead caps
    • Oct 2007
    • 4957
    • New Zealand

    #2
    Re: Philips 42pfl5332d Half screen distortion(pic)

    What type of display is it?
    "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
    -David VanHorn

    Comment

    Related Topics

    Collapse

    • Chrissygizmo
      Samsung UE55JU6800K half screen dark
      by Chrissygizmo
      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
      02-10-2025, 12:33 AM
    • Capacitorial
      Philips 46PFL8007K/12 - Picuture flickers on half of the screen
      by Capacitorial
      Hello guys.

      I recently got a TV that has the following problems:
      1. Sometimes it has to be turned on and off a few times, to boot up. Sometimes it starts from the first try
      2. When it is running normally, the right side of the screen flickers. Sometimes it is just a square of transparent white maybe a 1/3 of the right half (top right)
      3. The flicker is also sometimes a square that is filled with lines
      4. I noticed that when the TV brightness is set to max, it flickers less. I think the Standard setting is the worst where it comes more frequent
      5. When it runs a few minutes it gets better,
      ...
      12-17-2023, 11:11 AM
    • Ryan.man
      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
      by Ryan.man
      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
      02-04-2025, 12:23 PM
    • valvashon
      LG 55UH6150- trouble powering up, then half lit screen (pictures!)
      by valvashon
      The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
      Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
      11-24-2024, 12:08 PM
    • Raulnn
      TD Systems K50DLG12US half black and half white screen
      by Raulnn
      good night! I have this screen that looks half black and half white. the tcon gives a low vgh value (5-6v). the rest seem fine. I first removed the flex from one half of the panel and then the other. Removing the left, vgh increases it to 25-26v. I think the problem is in that area, but there are not many elements on the integrated controller board. there are no shorted capacitors. could they be a cof? Some help?

      By the way, now the entire screen is black. Maybe some flex was not connected correctly... I have exchanged the flex and there are no variations, I don't think they are the...
      01-20-2024, 04:49 PM
    • Loading...
    • No more items.
    Working...