Hello I have a 60" Plasma Lg
The Screen is purple and slow to get the picture when turned on
I started searching this site and have found a lot of useful information
I removed the z sus board and fixed the broken solder joints on the coils.
I checked the powers as per the sticker
I checked the fuses on the boards and found high o/c on the vs for the Z sus
I replaced the fuse and now it wont turn on.
I removed the cables to the z sus board and the control board boots up
so I removed the fuse and I still have the original problem.
I am guessing control board wont boot because there is a further problem with the the Z sus board ( the fuse for the VS has not blown again.)
I have tried looking for the board online and its not as easy or as cheap to find as I had hoped. I would like to repair the board if possible.
Where should I begin.
Thanks Dan
The Screen is purple and slow to get the picture when turned on
I started searching this site and have found a lot of useful information
I removed the z sus board and fixed the broken solder joints on the coils.
I checked the powers as per the sticker
I checked the fuses on the boards and found high o/c on the vs for the Z sus
I replaced the fuse and now it wont turn on.
I removed the cables to the z sus board and the control board boots up
so I removed the fuse and I still have the original problem.
I am guessing control board wont boot because there is a further problem with the the Z sus board ( the fuse for the VS has not blown again.)
I have tried looking for the board online and its not as easy or as cheap to find as I had hoped. I would like to repair the board if possible.
Where should I begin.
Thanks Dan
Comment