Lg 50pc55 - 3 faint lines - duff panel or not?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • leo-saphira
    Member
    • Feb 2015
    • 32
    • UK

    #1

    Lg 50pc55 - 3 faint lines - duff panel or not?

    Quick question - I have one of these LG 50PC55

    there is 3 faint lines on the right hand side of the panel that shows in the lighter scences as per the attached photos - is it the panel itself failing or not?

    Thanks
    Attached Files
    Last edited by leo-saphira; 06-20-2015, 03:49 PM. Reason: Update
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Lg 50pc55 - 3 faint lines - duff panel or not?

    Unfortunately that is a bad panel
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • leo-saphira
      Member
      • Feb 2015
      • 32
      • UK

      #3
      Re: Lg 50pc55 - 3 faint lines - duff panel or not?

      thanks tom i will strip it for use in another set

      Comment

      Related Topics

      Collapse

      • howardc64
        TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
        by howardc64
        All left and right refers to looking from rear of TV (or looking from front with TV upside down)
        • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
        • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
        ...
        07-24-2025, 05:17 PM
      • learnmore
        Samsung UE70TU7020K Which lines to tape on a bad panel
        by learnmore
        Hello Community,

        I'm working on a Samsung UE70TU7020K.

        It looks like a bad panel. There is only 1 FPC cable from the Tcon (built into mainboard) to the panel.

        I'm using a piece of tap a few mils (covers about 8-10 pins), at different locations and have had varying results but nothing that is remotely watchable (multiple lines across all the screen, half screen and total black out on screen). The buffer board is divided into 3 boards. I've disconnected the end board one at a time but each time the screen was totally black. I presume it's because the potential...
        03-15-2024, 03:01 PM
      • Anonmis
        Samsung 55" UN55JS9000 - Pink vertical lines due to chipped LCD panel?
        by Anonmis
        Hello all, I was recently repairing my Samsung 55" UN55JS9000 tv from the common burnt backlight LED's and cracked light guide panel issue. After replacing the LED's and putting the TV back together, I tested the tv and all I was getting was sound but no image. Somewhere along the way (could be related to the next issue) the T-Con board became damaged and after replacing it I have made a little bit of progress but now have bright pink vertical lines and still no image.

        The bigger issue .... I took the TV apart again and realized that I likely didn't sit the LCD panel correctly...
        12-01-2023, 04:31 PM
      • Raulnn
        Xiaomi L55M5-5ASP fine lines on the panel uniform
        by Raulnn
        Good afternoon! Does anyone know how to remove these lines? They are very fine lines at the bottom of the panel. I have 2 identical panels, and I have even thought that this brand has this lattice format, although I highly doubt it.

        The photo from the YouTube app is where it is best seen.

        thanks in advance....
        01-28-2024, 10:30 AM
      • howardc64
        LG 49UJ6500 LCD panel lighter band that goes away
        by howardc64
        49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

        Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
        02-19-2023, 12:13 AM
      • Loading...
      • No more items.
      Working...